Yunus, Doruk Erdem Sohrabi, Salman He, Ran Shi, Wentao Liu, Yaling
Published in
Journal of micromechanics and microengineering : structures, devices, and systems
In this paper, we reported a new approach for particle assembly with acoustic tweezer during three-dimensional (3D) printing for the fabrication of embedded conductive wire with 3D structures. A hexagon shaped acoustic tweezer was incorporated with Digital Light Processing (DLP) based stereolithography (SLA) printer to pattern conductive lines via ...
Ferrage, Loïc Bertrand, Ghislaine Lenormand, Pascal Grossin, David Ben-Nissan, Besim
The additive manufacturing of bioceramic parts has been investigated since the 1980s. This paper offers an overview of the present achievements in the production of alumina, zirconia and hydroxyapatite parts by means of selective laser sintering/melting of a powder bed or stereolithography. A focus is placed on these specific materials because of t...
Tasopoulos, Theodoros Kouveliotis, Georgios Polyzois, Grigoris Karathanasi, Vasiliki
Published in
Acta stomatologica Croatica
Digital technologies related to imaging and manufacturing provide the clinician with a wide variety of treatment options. Stereolithography (SLA) offers a simple and predictable way for an accurate reconstruction of congenital or acquired defects. A 65-years old cancer patient with non- keratinized squamous cell carcinoma of left maxillary sinus ca...
Bundoc, Rafael Cruz Delgado, Giorgio De Guzman Grozman, Samuel Arsenio Munoz
Published in
Asian spine journal
Cadaveric study. The purpose of this study was to assess the accuracy and feasibility of cervical pedicle screw (CPS) insertion into the subaxial cervical spine placed using a patient-specific drill guide template constructed from a stereolithographic model. CPS fixation is an invaluable tool for posterior cervical fixation because of its biomechan...
McColl, Erin A.
The two projects covered by this thesis describe new ways to leverage modern advancements in additive manufacturing techniques in the field of biofabrication. The initial project was a proof-of-principle study which involved the selection, customisation and use of a commercially available stereolithography (SLA) 3D printer to produce synthetic stru...
Unterhofer, Claudia Wipplinger, Christoph Verius, Michael Recheis, Wolfgang Thomé, Claudius Ortler, Martin
Published in
Neurologia i neurochirurgia polska
Reconstruction of large cranial defects after craniectomy can be accomplished by free-hand poly-methyl-methacrylate (PMMA) or industrially manufactured implants. The free-hand technique often does not achieve satisfactory cosmetic results but is inexpensive. In an attempt to combine the accuracy of specifically manufactured implants with low cost o...
Sciancalepore, Corrado Moroni, Fabrizio Messori, Massimo Bondioli, Federica
Zhao, Xiayun Rosen, David W.
Published in
The International Journal of Advanced Manufacturing Technology
Exposure Controlled Projection Lithography (ECPL) is a stereolithography-based additive manufacturing process, curing photopolymer parts on a stationary substrate. To improve the process accuracy with a closed-loop control, an in situ interferometric curing monitoring and measurement (ICM&M) system was developed to infer the output of cured height....
Marchives, Yoann
Every day, the data exchanges increase thanks to the new technologies. We can keep our files, our pictures, our videos online to have an access anywhere on the planet (for now). In this way, the data output of the telecommunication systems has to be increased in order to satisfy the more and more demanding users. One way to allow this is to increas...
Wang, Lu Ni, Xiuyuan
Published in
Polymer Bulletin
We here report the photosensitive nanocomposites as the new rapid prototyping materials. The nanocomposites are prepared using the properly surface-modified sepiolite nanofibers, graphene oxide, TiO2 and SiO2 nanoparticles as the reinforcing fillers in the epoxy-based resin. These nanocomposites are investigated about the mechanical properties, vis...
