Maintaining and managing hundreds of locks and physical keys for an apartment complex can be time consuming and costly, especially when the apartments turn over to new tenants. Our goal was to develop a smart door lock that is compatible with Obodo’s management app for apartment complexes to make accessing apartments secure and simpler for tenants ...
In this thesis, a proof of concept for a current-source DC-DC converter for powering sensors used in an underwater communications system is presented. The proposed converter steps down an input current of 0.9 A to 0.625 A, while maintaining an output voltage of 24 V and output power of 15 W. The complete steady-state analysis and design of the prop...
A hybrid AC/DC house aims to maximize the use of AC electricity from the utility grid and DC electricity from renewable energy sources such as roof-top solar panels. The hybrid system will therefore improve the reliability of the electrical by enabling power to be delivered to the loads even when one of the sources is not operational. One of the cr...
This paper outlines the process that Peter Strykers and Jacob Studebaker went through to set up the lighting and power system for the Paso Robles Police Department gun range located off highway 46. Before our installation, the gun range had zero lighting so the officers could not use it after sunset. We allowed the officers to light the gun range w...
A microgrid is a local energy grid that could be disconnected from the larger grid and operate autonomously. This particular segment of the power industry is growing due to its reliability during times of emergency and crisis. Among these benefits are improved efficiency, lower operating costs, renewable generation sources, and improved resiliency ...
In this work, we dive into the detailed design of a test load or load slammer circuit for DC/DC converters to ensure their correct functioning. This is accomplished through quick variations in frequency, amplitude, and duty cycle of the current being drawn by the converter into the load. Computer simulations of the design were performed using LTSpi...
The Gold Tree Solar Farm, designed by REC Solar, has a rated output power of 4.5 MW and began operation in 2018 to provide electricity to Cal Poly’s campus. Gold Tree Solar Farm site terrain consists of rolling hills and uneven slopes. The uneven typography results in interrow shading, requiring a modified tracking control algorithm to maximize pow...
To make a sustainable product and provide a temporary source of lights on during emergencies, this project aims to create a small unit that can be attached to a light bulb of any variety and connect it to a socket. Within the device is a rechargeable battery that, when the device is not connected to an 120V AC, 240V AC, or 48V DC power source, will...
In this work a proof of concept for a step-down DC-DC converter used in a high voltage submarine application is presented. The purpose of the converter is to step down a 5000V-6000V input to a 24V output which can serve as an input to a submarine sensor. The completed system consists of two stages where the first stage is an unregulated switched ca...
This thesis introduces the design and analysis of a single-stage inverter. A circuit was designed and simulated as a proof of concept to investigate the possibility of using boost and buck-boost converters to provide an AC output. The proposed circuit utilizes non-synchronous boost and buck-boost converters due to their simplicity in control signal...
