Le, Van Thao Quinsat, Yann
In Laser Powder Bed Fusion (LPBF) additive manufacturing machines, a laser galvanometric scanning system is used to control the movement of the laser beam, which melts material powders layer-by-layer in a powder bed. Errors between desirable positions and actual positions of the laser in the work plane of the machine directly affect the geometry ac...
Arrieta-Escobar, Javier Derrien, Delphine Ouvrard, Stéphanie Asadollahi-Yazdi, Elnaz Hassan, Alaa Boly, Vincent Tinet, Anne-Julie Dignac, Marie-France
The soil, at the interface between geosphere, biosphere, and atmosphere, is a particularly challenging object to study. The ecological and environmental impacts of soil functioning encourage soil scientists to exploit new technologies to generate new data or develop new research protocols. Among these technologies, 3D printing is a promising techno...
Mazumder, Sangram Pantawane, Mangesh V. Ho, Yee-Hsien Dahotre, Narendra B.
Published in
Applied Physics A
The electrochemical response of laser powder bed additively manufactured Ti6Al4V is often considered at room-temperature conditions; however, structural Ti6Al4V components in a warm marine environment tend to respond differently. In light of this, the present work investigates the electrochemical response of the Ti6Al4V fabricated using laser powde...
Chen, Bin Chen, Peng Huang, Yongjun Xu, Xiangxi Liu, Yibo Wang, Shuangxi
Published in
Chinese Journal of Mechanical Engineering
Diamond tools with orderly arrangements of diamond grits have drawn considerable attention in the machining field owing to their outstanding advantages of high sharpness and long service life. This diamond super tool, as well as the manufacturing equipment, has been unavailable to Chinese enterprises for a long time due to patents. In this paper, a...
Colorado, Henry A. Mendoza, David E. Valencia, Fernando L.
Published in
Journal of Science Education and Technology
This research presents results for the design and creation of supporting teaching materials using additive manufacturing. The materials are inspired by selected artwork of four animal species, which belong to a collection from the museum of the University of Antioquia. The topic selected was fauna in Colombia, and the animals in question were chose...
SOW, M.C. DE TERRIS, Thibaut CASTELNAU, Olivier HADJEM-HAMOUCHE, Zehoua COSTE, Frédéric FABBRO, R. PEYRE, Patrice
The use of large beams in the Laser Powder Bed Fusion (L-PBF) process has been receiving increasing attention for the past few years and may widen the dissemination of this technology in the industry, as well as help increase the production volume. In this paper, a detailed comparison is presented between a usual 80 μm diameter Gaussian laser spot ...
Chae, Hobyung Huang, E-Wen Woo, Wanchuck Kang, Suk Hoon Jain, Jayant An, Ke Lee, Soo Yeol
Published in
Journal of Alloys and Compounds
F0FC • In-situ thermal cycling neutron diffraction experiments. F0FC • The effect of thermal history during additive manufacturing was revealed. F0FC • During cycling, phase transformation changed from fully-reversible to irreversible. F0FC • Inhomogeneous residual stresses were developed. F0FC • Martensite showed higher compressive residual stress...
HATTAL, Amine DJEMAI, Madjid FOUCHET, Jean Jacques CHAUVEAU, Thierry BACROIX, Brigitte HOCINI, Azziz DIRRAS, Guy
Published in
MATEC Web of Conferences
Additive manufactured Ti6Al4V reinforced with nano yttria-zirconia (nYSZ) parts were fabricated using selective laser melting technology (SLM). The as-received Ti6Al4V powder and two powder mixtures of Ti6Al4V mixed with several nYSZ contents (1wt% and 2.5wt%) were prepared and then SLM processed. Parts were further subjected to a stress relief hea...
Depradeux, Lionel Robitaille, Corentin Duval, Gilles Eckenfelder, Luc Locatelli, Camille
Published in
MATEC Web of Conferences
The Rapid Additive Forging (RAF) process is a Direct Energy Deposition (DED) Additive Manufacturing (AM) process, based on the deposition of a Titanium alloy on a substrate plate. This process has been developed for the production of Titanium parts of aeronautic components. In this study, a Finite Element (FE) numerical simulation methodology has b...
Pei, Xuan Wu, Lina Zhou, Changchun Fan, Hongyuan Gou, Maling Li, Zhengyong Zhang, Boqing Lei, Haoyuan Sun, Huan Liang, Jie
...
Published in
Biofabrication
Biofabrication of personalized titanium scaffold mimicking that of the osteocyte microenvironment is challenging due to its complex geometrical cues. The effect of scaffolds geometrical cues and implantation sites on osteogenesis is still not clear. In this study, personalized titanium scaffolds with homogeneous diamond-like structures mimicking th...