Published in Materials Science-Poland
This article provides information about comparative research on designing of spinning trajectories for products with a non-circular cross-section. Generation of two outlines for the two mandrels was carried out using three methods: (1) a spreadsheet, (2) a 2D CAD program, and (3) a 3D CAD program. Technological tests were carried out using mandrels...
Published in Materials Science-Poland
Formamidinium lead tribromide (FAPbBr3) perovskite quantum dot (PQ-Dot) solution was incorporated in a polymer sol, which was used to fabricate solid nanocomposite rods and disks. The solid nanocomposite samples were studied by different characterization techniques. The absorption, emission, and excitation spectra of the PQ-Dot in the solid rods/di...
Published in Materials Science-Poland
It is an underlying fact for the case of the joining process especially welding to have optimized parameters to achieve joints with outstanding mechanical characteristics. In the current article, using stir-cast aluminum-based alloy (Al 6061) is stir-cast with Al 6061/5%wt. silicon carbide, Al 6061/10%wt. silicon carbide, and Al 6061/18%wt. silicon...
Published in Materials Science-Poland
The present investigation aimed to determine the optimal parameters for wire-cut electrical discharge machining (WEDM) for stir cast aluminum alloy AA6063 at 850°C reinforced with 10 wt.% green SiC (SiCg) and black SiC (SiCb) particles. The WEDM machining parameters, such as pulse on time (TON), wire feed (WF) rate, and flushing pressure (FP) of th...
Published in Materials Science-Poland
Angular color distribution uniformity has been one of the most relevant properties in the development of white light-emitting diodes (WLEDs), since color consistency and uniformity are crucial factors in quality evaluation of a WLED. Here, particularly considering the need to overcome the poor chromaticity usually associated with WLED, we introduce...
Published in Materials Science-Poland
Studies in the literature indicate that while tire crumb rubber can be added to concrete to replace some natural aggregates, steel fibers need to be introduced to overcome the compromise in the mechanical properties of concrete, especially compressive and tensile strength, that would be caused due to the addition of tire crumb rubber exclusively. I...
Published in Materials Science-Poland
Three kinds of electrode with different niobium contents were developed and compared, and the influence of alloying elements on microstructure and mechanical properties was summarized. Strong carbide elements such as Nb, Ti, and V were added to form stable precipitates. The existence of intercrystalline precipitates leads to pinning and zigzag of g...
Published in Materials Science-Poland
CaCO3 and TiO2 are proposed in this study as particles for scattering enhancement (SEPs) of phosphor-converted white light-emitting diodes (pc-WLEDs). The use of these two SEPs for scattering improvement enables boosting of the color homogeneity of the WLED devices. Each SEP is mixed with YAG:Ce3+ and silicone composition to examine their optical i...
Published in Materials Science-Poland
Studies dealing with process improvement of aluminum alloys and their grain structure refinement are the current area of interest in casting companies and foundries, the aim being to enhance the properties of the base metal. In this study, the microstructural and mechanical properties of commercial Al-Si9.8-Cu3.4 alloy die castings influenced by di...
Published in Materials Science-Poland
Microelectromechanical system (MEMS) has been highly valued since the size of the MEMS structure is miniaturized, the spacing between the components is in the nanometer range, and the behaviors of friction and adhesion greatly affect the reliability of MEMS. An atomic force microscope (AFM) was used to observe the surface morphology of carbon nanot...
