Sathishkumar, Sankar Paulraj, Jawahar Chakraborti, Prasun Chandradass, Jeyaseelan Ghosh, Subrata Kumar
Published in
International Journal of Materials Research
Human hip failure remains a significant issue, and constructing artificial joints is imperative for affected individuals. This study examined the mechanical and wear behavior of polyether ether ketone (PEEK) polymers, including bare PEEK (BP), HA (Hydroxyapatite)-infused PEEK (HA-PEEK), and GO (Graphene oxide)-infused HA-PEEK (GO-HA-PEEK). The samp...
Muniyappa, Santosh Kumar Achutarao, Bharatish Venkatram, Mamtha Angadi, Gangadhar Solaiachari, Sivakumar
Published in
International Journal of Materials Research
This paper aims to investigate the effect of laser ablation on the mechanical performance of graphene-filled glass fibre reinforced polymer (GFRP) repaired lap joints. The performance characteristics of repaired laminates were measured in terms of surface roughness, tensile strength and flexural strength according to ASTM standards. While the surfa...
Komal, Mishra, Kuldeep Kumar, Yogesh Shukla, Vivek Kumar
Published in
International Journal of Materials Research
The effect of two activating agents namely phosphoric acid (H3PO4) and iron (III) chloride (FeCl3) is investigated, in activation of carbon obtained from Tinospora cordifolia. The structural and morphological properties of the synthesized activated carbons were investigated using X-ray diffraction, scanning electron microscopy, Raman spectroscopy, ...
Ahmed, Saeed Badsha, Mohammad A. H. Khan, Mohammad Ehtisham Ali, Wahid Mohammad, Akbar Bashiri, Abdullateef H.
Published in
International Journal of Materials Research
Magnesium oxide-based adsorbents (MGO-A) with different morphologies were synthesized via the hexamethylene tetramine-assisted hydrothermal method. The role of four anions in the reaction system, chloride (Cl⁻), nitrate (NO3⁻), sulfate (SO42⁻), and acetate (C2H3O22⁻) was systematically investigated to determine the properties of the MgO. Standard c...
Basry, Nur Adila Amira Zuhailawati, Hussain Shariff, Khairul Anuar
Published in
International Journal of Materials Research
The aim of this work is to compare the responsive behaviour of titanium, niobium and titanium–niobium alloy during alkaline treatment in forming alkaline titanate layer and their resultant bioactive properties. Titanium and niobium powder mixture with composition in the beta region was pressed at 550 MPa and sintered at 1,200 °C for 2 h. The alloy ...
Tseng, Yu-Fong Liu, Chao-Hwa Lin, Ching-Bin
Published in
International Journal of Materials Research
Aluminum matrix/aluminum-iron intermetallic composite materials pose challenges in plastic processing due to the susceptibility of hard intermetallic compound particles to fracture. This study introduces a novel fabrication method involving pure iron mesh, hot-dip aluminum plating, and solidification. Through ten consecutive folding, forging, and i...
Ma, Guofeng Jin, Jiaoyang Dong, Yuting Zhang, Hongling Sun, Yuan Wang, Shiyang Yang, Yanhong
Published in
International Journal of Materials Research
A magnetic and efficient Fe78Si9B13/MnO2 composite was successfully fabricated by a facile hydrothermal method. This composite was employed as a Fenton-like catalyst for the degradation of methyl orange (MO) under activation of H2O2. The phase and morphology of the composite were characterized by X-ray diffraction, Fourier transform infrared spectr...
Kumar Madheswaran, Sangeeth Venkatesh Raja, K.
Published in
International Journal of Materials Research
The manufacturing of functional parts from the fused deposition modeling 3D printer is limited due to poor mechanical properties, low surface finish, and huge production time. During 3D printing of prototypes, the time consumption of printing and mechanical properties of the model is directly proportional. The fused deposition modeling process para...
Kumar, Vinoth C. Gajjela, Rajyalakshmi
Published in
International Journal of Materials Research
This research study focused on coating AZ31B magnesium alloy using plasma electrolytic oxidation with time durations of 4 min, 6 min, and 8 min in electrolytes containing sodium metasilicate and sodium hydroxide. The electrolytes were further enriched with different concentrations of cerium dioxide, anatase titanium dioxide and hydroxyapatite at a ...
Saha, Suvankar Mochahari, Prince Kumar
Published in
International Journal of Materials Research
Zinc oxide (ZnO) nanoparticles have been successfully synthesized by using Terminalia arjuna bark extract via a green route. Structural analysis using X-ray diffraction confirmed the prepared samples are crystalline having hexagonal wurtzite structure with space group P63mc and average crystallite size is found to be 8.93 nm. Rietveld refinement of...
