Affordable Access

Publisher Website

Research on the oxidation characteristics of zinc sulfite in the zinc oxide desulfurization process.

Authors
  • Cao, Xuejiao1
  • Zhang, Ting'an1
  • Liu, Yan1
  • Zhang, Weiguang1
  • Lv, Guozhi1
  • 1 Key Laboratory of Ecological Utilization of Multi-metal Intergrown Ores of Ministry of Education, School of Metallurgy, Northeastern University, Shenyang, People's Republic of China. , (China)
Type
Published Article
Journal
Environmental Technology
Publisher
Informa UK (Taylor & Francis)
Publication Date
Jan 01, 2022
Volume
43
Issue
2
Pages
183–191
Identifiers
DOI: 10.1080/09593330.2020.1782993
PMID: 32705961
Source
Medline
Keywords
Language
English
License
Unknown

Abstract

Aiming at the pollution problem of low-content SO2 in non-ferrous metal production industry, the oxidation kinetics of zinc sulfite in the zinc oxide desulfurization process was studied. The concentration change of Zn2+, variation of pH, temperature and apparent activation energy in the oxidation process of two ZnSO3 samples were investigated systematically. The results indicate that the raw material with different crystal water has little effect on the oxidation kinetic of zinc sulfite. The reaction process comprises two stages: the dissolution process and the oxidation process. The zinc ion concentration is linearly rising with the action time during the oxidation process. The pH value rises quickly in the dissolution process and goes down slowly with reaction time in the oxidation process. The process is mainly controlled by a diffusion step and less effected by the temperature. The apparent activation energy Ea obtained for the two samples are 8.662 and 9.645 kJ/mol, respectively. Integrated with the kinetic model, the oxidation rate of zinc sulfite is controlled by the diffusion of HSO3- and O2 to the gas-liquid interface.

Report this publication

Statistics

Seen <100 times