Optimization of set-up conditions by computer control in milling and circular sawing of wooden materials. Appendix 1 Activity report / Optimierung von Einstellbedingungen durch AC-Regelung beim Fraesen und Kreissaegen von Holzwerkstoffen. Anlage 1 Arbeitsbericht

In order to reduce the wear of the tool edge and to reduce the costs of manufacturing, set-up conditions in milling and circular sawing of wooden materials have been optimized. In the frame of this work an on-line device for measuring the edge roughness of wooden materials at machining has been developed. A process computer system has been built, and the software for measuring and control has been implemented. On the basis of an established mathematical model a computer program for the process control has been written and tested. The construction of a device for laser optical tool edge wear control is in progress / SIGLE / Available from TIB Hannover: FR 6584 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische Informationsbibliothek / Deutsche Forschungsgemeinschaft (DFG), Bonn (Germany) / DE / Germany