Affordable Access

Nonwoven fiber meshes for oxygen sensing

Authors
  • Salaris, Nikolaos;
  • Chen, Wenqing;
  • Haigh, Paul;
  • Caciolli, Lorenzo;
  • Giobbe, Giovanni Giuseppe;
  • De Coppi, Paolo; 91457;
  • Papakonstantinou, Ioannis;
  • Tiwari, Manish K.;
Publication Date
Jul 01, 2024
Source
Lirias
Keywords
License
Green
External links

Abstract

Accurate oxygen sensing and cost-effective fabrication are crucial for the adoption of wearable devices inside and outside the clinical setting. Here we introduce a simple strategy to create nonwoven polymeric fibrous mats for a notable contribution towards addressing this need. Although morphological manipulation of polymers for cell culture proliferation is commonplace, especially in the field of regenerative medicine, non-woven structures have not been used for oxygen sensing. We used an airbrush spraying, i.e. solution blowing, to obtain nonwoven fiber meshes embedded with a phosphorescent dye. The fibers serve as a polymer host for the phosphorescent dye and are shown to be non-cytotoxic. Different composite fibrous meshes were prepared and favorable mechanical and oxygen-sensing properties were demonstrated. A Young's modulus of 9.8 MPa was achieved and the maximum oxygen sensitivity improved by a factor of ∼2.9 compared to simple drop cast film. The fibers were also coated with silicone rubbers to produce mechanically robust sensing films. This reduced the sensing performance but improved flexibility and mechanical properties. Lastly, we are able to capture oxygen concentration maps via colorimetry using a smartphone camera, which should offer unique advantages in wider usage. Overall, the introduced composite fiber meshes show a potential to significantly improve cell cultures and healthcare monitoring via absolute oxygen sensing. / status: published

Report this publication

Statistics

Seen <100 times