Thermochron iButtons are being used increasingly by animal physiologists to measure long-term patterns of body temperature in reptiles, birds and mammals. Typically, iButtons are surgically implanted into the intraperitoneal cavity where they measure and store body temperature together with the date and time from an onboard real-time clock. In 16-bit resolution, the DS1922L iButton can store a total of 4,096 data points over pre-determined sampling intervals. iButtons have proved invaluable in measuring patterns of torpor and hibernation in animals larger than 70 g. Weighing around 3.5 g after potting with wax, iButtons are too heavy and large to implant into animals smaller than 70 g because their weight exceeds 5% of the animal's total body weight. This paper describes how the stainless steel canister housing the DS 1922L iButton battery and circuit board can be removed to reduce the weight of the components to 1.49 g after waxing (ready for implantation) without compromising the function or battery life of the iButton. The modified iButton can be implanted into animals as small as 20-30 g. Calibration data revealed an offset of ca. 1 degrees C on average, confirming that iButtons must be calibrated prior to implantation.