Affordable Access

Measurement of parameters of simple lenses using digital holographic interferometry and a synthetic reference wave.

Authors
Type
Published Article
Journal
Applied Optics
0003-6935
Publisher
The Optical Society
Publication Date
Volume
46
Issue
11
Pages
2022–2026
Identifiers
PMID: 17384716
Source
Medline

Abstract

The use of digital holographic intrerferometry in the testing of simple thin lenses is explored. Focal length, radius of curvature, and refractive index are the lens parameters that can be determined using this method. The digital holograms using the lens under test are recorded at various positions of the test lens using off-axis geometry. This is combined with a digitally computed plane wavefront to determine the curvature of the light beam emerging from the test lens. Focal length is the position of the test lens where a single fringe results. The radius of curvature of the test lens is also determined similarly using a long focal length lens to concentrate a collimated beam onto the test lens. The nonuniformities on the lens surface could also be found by using this method. The implementation of the method is shown by using computer simulations in the case of biconvex lenses. The method can be utilized to measure the parameters of plano-convex and concave lenses also.

There are no comments yet on this publication. Be the first to share your thoughts.

Statistics

Seen <100 times
0 Comments
F