Affordable Access

Influence of GaAsP insertion layers on performance of InGaAsP/InGaP/AlGaAs quantum-well laser

Authors
  • yu-lian), yl cao (cao
  • peng), p lian (lian
  • wen-quan), (ma
  • qing), q wang (wang
  • xu-ming), (wu
  • guo-rong), (he
  • hui), (li
  • xiao-dong), xd wang (wang
  • guo-feng), gf song (song
  • liang-hui), lh chen (chen
Publication Date
Jan 01, 2006
Source
Knowledge Repository of SEMI,CAS
Keywords
License
Unknown
External links

Abstract

We report on the use of very thin GaAsP insertion layers to improve the performance of an InGaAsP/InGaP/AlGaAs single quantum-well laser structure grown by metal organic chemical vapour deposition. Compared to the non-insertion structure, the full width at half maximum of photoluminescence spectrum of the insertion structure measured at room temperature is decreased from 47 to 38 nm indicating sharper interfaces. X-ray diffraction shows that the GaAsP insertion layers between AlGaAs and InGaP compensates for the compressive strain to improve the total interface. The laser performance of the insertion structure is significantly improved as compared with the counterpart without the insertion layers. The threshold current is decreased from 560 to 450mA while the slope efficiency is increased from 0.61 to 0.7W/A and the output power is increased from 370 to 940mW. The slope efficiency improved is very high for the devices without coated facets. The improved laser performance is attributed to the suppression of indium carry-over due to the use of the GaAsP insertion layers.

Report this publication

Statistics

Seen <100 times