Affordable Access

Catalytic upgrading of volatiles from coal pyrolysis over sulfated carbon-based catalysts derived from waste red oil

  • Wang, Deliang
  • Chen, Zhaohui
  • Zhou, Zhimao
  • Wang, Demin
  • Yu, Jian
  • Gao, Shiqiu
Publication Date
Jun 15, 2019
Institutional Repository of Institute of Process Engineering, CAS (IPE-IR)
External links


Sulfated carbon-based catalysts, red oil-derived carbon materials (RDCMs), were prepared by the self-assembly process from industrial alkylation process waste red oil. The performance of catalysts on upgrading of coal pyrolysis volatiles was investigated in a two-stage fixed-bed reactor. Compared with activated carbon (AC) or char, RDCMs exhibited better performance in increasing the yield and fraction of light tar (boiling point < 360 degrees C). The higher specific surface areas and relatively more defects for RDCMs promoted the conversion of more heavy tar into light tar. The high-content doped sulfur in RDCMs contributed to more oxidation reaction in the secondary reaction for producing gaseous products. The pyrolysis water could be activated on the sulfur functional group to form H and OH radicals, which were able to stabilize the larger radical fragments from tar cracking to form more oxygenated organic compounds. The yield and fraction of light tar after catalytic upgrading using RDCMs (10 wt% of the tested coal) at 500 degrees C were 7.9 wt% and 80.0%, respectively, which increased by 19.6% and 33.3% in comparison with that from coal pyrolysis without catalyst.

Report this publication


Seen <100 times