Affordable Access

Evolution of compressive strains in retained austenite during sub-zero Celsius martensite formation and tempering

Authors
Publisher
Pergamon
Publication Date
Keywords
  • The Development Of Martensite During Sub-Zero Celsius Treatment Of A 1 Wt
  • % C
  • 1
  • 6 Wt
  • % Cr Steel Was Investigated By In Situ And Ex Situ (Synchrotron) X-Ray Diffraction At The Synchrotro
  • (Ii) To Measure The Evolution Of The Lattice Strain In Retained Austenite
  • And (Iii) To Identify The Different Stages Of Tempering
  • This Work Shows For The First Time That The Compressive Strains Built Up In Austenite Upon Martensit
  • Furthermore
  • It Is Demonstrated That Sub-Zero Celsius Treatment After Tempering Leads To Compressive Strain In Au
  • Finally
  • It Is Reported That No Compressive Strain Builds Up In Austenite When The Martensite Formation Occur

Abstract

Evolution of compressive strains in retained austenite during sub-zero Celsius martensite formation and tempering - DTU Orbit (16/05/14) Evolution of compressive strains in retained austenite during sub-zero Celsius martensite formation and tempering - DTU Orbit (16/05/14) Villa, M., Pantleon, K., & Somers, M. A. J. (2014). Evolution of compressive strains in retained austenite during sub-zero Celsius martensite formation and tempering. Acta Materialia, 65, 383-392. 10.1016/j.actamat.2013.11.007

There are no comments yet on this publication. Be the first to share your thoughts.