Affordable Access

Cobalt and molybdenum activated electrodes in foam based alkaline electrolysis cells at 150-250 °C and 40 bar

Authors
Publisher
Elsevier S.A.
Publication Date
Keywords
  • A New Type Of Alkaline Electrolysis Cells With Nickel Foam Based Gas Diffusion Electrodes And Koh (A
  • 200 C And 250 C At A Pressure Of 40 Bar
  • Two Cells Have Been Characterized During The 270 H Long Test
  • Using Impedance Spectroscopy
  • Cyclic Voltammetry And Chronoamperometry At An Applied Cell Voltage Of 1
  • 5 V
  • 1
  • 625 V And 1
  • 75 V
  • The Performance Of The Electrolysis Cells Was Improved By The Addition Of Cobalt Oxide And Molybdenu
  • At 250 C Current Densities Of 1
  • 1 A Cm-2 And 2
  • 3 A Cm-2 Were Obtained At Cell Voltages Of 1
  • 5 V And 1
  • 75 V
  • Respectively
  • © 2014 Elsevier B
  • V
  • All Rights Reserved

Abstract

Cobalt and molybdenum activated electrodes in foam based alkaline electrolysis cells at 150-250 °C and 40 bar - DTU Orbit (16/05/14) Cobalt and molybdenum activated electrodes in foam based alkaline electrolysis cells at 150-250 °C and 40 bar - DTU Orbit (16/05/14) Allebrod, F., Chatzichristodoulou, C., & Mogensen, M. B. (2014). Cobalt and molybdenum activated electrodes in foam based alkaline electrolysis cells at 150-250 °C and 40 bar. Journal of Power Sources, 255, 394-403. 10.1016/j.jpowsour.2014.01.024

There are no comments yet on this publication. Be the first to share your thoughts.