Öztürkmen, Ebru Güneşoğlu, Cem Topalbekiroğlu, Mehmet
Published in
Fibres & Textiles in Eastern Europe
This study aimed to develop a cost-effective and resource-efficient application to enhance the thermal stability, flame retardancy, self-cleaning, and antibacterial properties of cotton denim fabrics through a single-step, flexible, and simple polyurethane (PU) based back-coating method, ultimately increasing the use of denim fabrics in daily and w...
Shivaram, Shilpa Paul, Done Rinshun S K, Suresh Babu B, Vigneshwaran V, Haritha Sree J, Roshan Johns D, Nirmal
Published in
Physica Scripta
Titanium dioxide (TiO2) thin films were deposited on glass substrates using Spray Pyrolysis technique, with variations in multiple deposition parameters. The molarity of the precursor was altered within a small range from 0.09 M–0.15 M. The deposition temperature was systematically adjusted from 200 °C to 400 °C while the ratio between precursor an...
Baqandwan, Hanadi Rajamanickam, Suvindraj Samsuri, Siti Azrah Mohamad Halim, Mohd Mahadi Pakhuruddin, Mohd Zamir
Published in
Physica Scripta
In this work, titanium dioxide (TiO2) thin film-based metal-semiconductor–metal (MSM) ultraviolet (UV) photodetectors (PDs) were fabricated on glass substrates via liquid phase deposition (LPD) technique at various deposition time in the range of 3–6 h. Varying deposition time significantly impacted the physical properties of the films. Increasing ...
obradović, v. sejkot, p. zabloudil, a. k., vokáč machalická vokáč, m.
Kevlar fibers are widely used for industrial and military purposes due to their remarkable mechanical properties, such as their high tenacity and high strength-to-weight ratio. In this study, two-layered Kevlar composite specimens were impregnated with 10 wt.% poly (vinyl butyral)/ethanol solution which contained TiO2 nanoparticles as reinforcement...
Tuoi, Nguyen Thanh Nguyet, Bui Thi Minh Tuyen, Tran Ngoc Khac Lieu, Pham Khieu, Dinh Quang Van Hung, Nguyen
Published in
Materials Research Express
Biochar (BC) derived from reed stems was prepared by high-temperature pyrolysis, and two types of ZnO/biochar (ZBC) and TiO2/biochar (TBC) composite materials were synthesized via a simple hydrolysis method. These composites, compared to pure ZnO and TiO2, exhibit not only improved but significantly enhanced crystalline structures and larger specif...
Kadhim, Firas J Hammadi, Oday A Ali, Mays K
Published in
Physica Scripta
This study concerns the production of advanced materials and a novel technique for enhancing photocatalytic efficiency, focusing specifically on the purification of air contaminated with methane gas. Titanium dioxide:Titanium nitride (TiO2/TiN) nanocomposite films were prepared by dc reactive magnetron sputtering of highly-pure titanium sheet in pr...
Prevalšek, Ema
Fotokataliza je ena izmed ključnih metod na področju trajnostne kemije, saj se njena uporabnost izkazuje na različnih področjih, vključno s čiščenjem onesnaženih voda. Zaradi povečanega obsega farmacevtske industrije in drugih antropogenih posegov v naravo se v vodi kopičijo organske snovi, ki jih obstoječe metode čiščenja v čistilnih napravah ne m...
Verma, Suraj Sahu, Deepak Almutairi, Bader O.
Published in
Frontiers in Materials
Biodiesel is an eco-friendly, renewable alternative fuel, and it can be obtained from soybean oil, vegetable oils, animal fat, or microalgae. This study presents a comprehensive investigation into the production and characterization of microalgae biodiesel utilizing multiple analytical techniques, including CHNSO analysis, Fourier-transform infrare...
Molera, Martí Sarret, Maria Fàbrega, Cristian Andreu, Teresa
Published in
Journal of The Electrochemical Society
In recent years, there has been a growing interest in the photoelectrochemical oxidation of glycerol to produce high-value products. Most studies have focused solely on the photocatalytic properties of the electrodes, overlooking their electrocatalytic properties and the different products obtained under dark conditions. Our work aims to address th...
Nishida, Asuka Sawada, Yuka Arai, Rion Ishibashi, Naoki Suzuo, Miho Ohno, Akiko Ashikaga, Takao Iijima, Kazutoshi
Published in
Frontiers in Toxicology
With the expansion of nanomaterials (NMs) usage, concerns about their toxicity are increasing, and the wide variety of NMs makes it difficult to assess their toxicity. Therefore, the development of a high-throughput, accurate, and certified method to evaluate the immunotoxicity of NMs is required. In this study, we assessed the immunotoxicity poten...
