This work is devoted to the influence of phosphazene modifiers with different substituents on the curing process, thermal properties and flammability of benzoxazine resin. Novel catalysts with m-toluidine substituents were introduced. The catalytic activity of studied phosphazene compounds decreased in the row: hexachlorocyclotriphosphazene (HCP) &...
The yokeless and segmented armature axial flux machine is considered an excellent topology for electric vehicles application. However, its performance is severely limited by the stator cooling system. The heat pipe, as the small size, lightweight, but highly efficient passive phase-change cooling element, has been attracting more and more attention...
Kiln is a prime need in the ceramics industry, where energy loss is a major part which consumes about 60% production cost through thermal energy for different applications. Higher density of fired and tunnel kiln refractory material lowers the thermal diffusivity and the proper selection of fired material minimizes the energy loss along the kiln. I...
An effective analytical technique for biomass characterisation is inevitable for biomass utilisation in energy production. To improve biomass processing, various thermal conversion methods such as torrefaction, pyrolysis, combustion, hydrothermal liquefaction, and gasification have been widely used to improve biomass processing. Thermogravimetric a...
This paper presents the impact of thermal lag on the progress of different coal types’ gasification by CO2. The analysis was performed using thermogravimetry and numerical modeling. Experiments were carried out at a heating rate of 1–50 Kmin-1 and a temperature ranging from 383 to 1173 K. The developed numerical model enabled the determination of a...
Coordination polymers with a new rigid ligand 1,3-bis(1,2,4-triazol-1-yl)adamantane (L) were prepared by its reaction with cadmium(II) or silver(I) nitrates. Crystal structure of the coordination polymers was determined using single-crystal X-ray diffraction analysis. Silver formed two-dimensional coordination polymer [Ag(L)NO3]n, in which metal io...
The influence of carbon on the phase transformation behavior of stainless steels with the base chemical composition Fe–13Cr (wt.%), and carbon concentrations in the range of 0–0.7 wt.%, was studied at temperatures between −196 °C and liquidus temperature. Based on differential scanning calorimetry (DSC) measurements, the solidification mode changed...
Food containers made from glass are separately collected from urban solid waste at 76% in most parts of Europe. The cullet glass finds its way to re-melting, while the debris is often disposed of. With this contribution, we suggest an upcycling process where glass debris is simply ground without any washing operation and added to an alkali-activate...
Organic-inorganic silica composites have been prepared via acid catalyzed sol-gel route using tetramethoxysilan (TMOS) and methyl-trimethoxysilane (MTMS) as silica precursors and n-butyl-3-methylpyridinium tetrafluoroborate ([bmPy][BF4]) as co-solvent and pore template, by varying the content of the ionic liquid (IL). Morphology of the xerogels pre...
Al2O3-MoSi2 coating has excellent high-temperature stability. On this basis, Al2O3-MoSi2-Cu composite high-temperature absorbing coating was prepared by atmospheric plasma spraying method. The phase transition characteristics of Al2O3-MoSi2-Cu spraying feedstock under high temperatures were analyzed by thermogravimetric test, the phase analysis of ...
