Published in Polymers
Understanding the flow behavior of polymer/carbon nanotube composites prior to melt processing is important for optimizing the processing conditions and final product properties. In this study, the melt shear viscosity, specific volume and thermal conductivity of low-density polyethylene (LDPE) filled with multi-walled carbon nanotubes (MWCNTs) wer...
Published in Polymers
The two-domain Schmidt equation of state (EoS), which describes the pressure-specific volume–temperature (pvT) behavior of polymers in both the equilibrium molten/liquid state and non-equilibrium solid/glassy state, is often used in the simulation of polymer processing. However, this empirical model has a discontinuity problem and low fitting accur...
Published in Inorganic Materials: Applied Research
AbstractThe influence of the ratio of high-density polyethylene and low-density polyethylene on the regular changes in breaking stress, tensile yield stress, elongation, and chilling temperature of composite materials are considered. In accordance with the Avrami equation, the formation and development of crystallization centers in a zone of the fi...
Published in Journal of texture studies
Influence of the viscoelastic properties of rice dough on the mechanical properties and the microstructure of rice crackers was experimentally investigated to predict and control the quality of the rice cracker in the early stage of the lengthy manufacturing process. Various rice doughs steamed for 5, 30, or 60 min and kneaded for 5, 10, or 15 min ...
Published in International Agrophysics
In this study, we investigated the impact of adding solutions with different potassium and sodium concentrations on dispersible clay, water retention characteristics, air permeability, and soil shrinkage behaviour using two agricultural soils from Switzerland with different clay content but similar organic carbon to clay ratio. Three different solu...
Published in European Pharmaceutical Journal
Dispersion of multilamellar liposomes of dimyristoylphosphatidylcholine (DMPC) and cholesterol (CHOL) were studied by vibrational densitometer for the CHOL mole fractions X = 0−0.54 in the temperature range 18−50 °C, both below and above the main phase transition. DMPC-CHOL bilayers served as a simple model for lipidic part of biological membrane. ...
Published in International Journal of Food Engineering
Wheat flour, whole wheat flour, 25 and 50 % rye flour substituted wheat flour blends, 15 and 30 % wheat bran substituted wheat flour blends were supplemented with amyloglucosidase (at 0.000875 and 0.001 %), glucose oxidase (at 0.0003 and 0.001 %) and hemicellulase (at 0.001 and 0.005 %). The effects of enzymes on the extensographic properties of do...
Published in Russian Engineering Research
The inheritance of carbide-particle dimensions in the explosive production of Cr3C2-Ti hard alloys is considered. A structural model of the carbide skeleton is proposed.
Crack-free GaN epitaxial layer was obtained through inserting 80 nm graded AlGaN buffer layer between GaN epilayer and high temperature AlN buffer on 2-in Si(111) substrates by metal organic chemical vapor deposition. This paper investigated the influence of AlGaN buffer thickness on the structural properties of the GaN epilayer. It was confirmed f...
