Sharma, Saurabh S Parashar, Avinash
Published in
Journal of Physics D: Applied Physics
Nuclear structures are prone to irradiation-induced defects that make them susceptible to alternation in mechanical and thermal properties. The transmutation of Ni to insoluble He atoms is considered to be responsible for the embrittlement of Ni. Helium bubbles are deemed responsible for the deterioration of mechanical and thermal properties of the...
Vinoj, K Raja, R Thankachan, Titus Jannet, Sabitha
Published in
Engineering Research Express
This research deals with investigating the effects of amount of hybrid reinforcement, rotational speed and traverse speed on the mechanical and wear characteristics of copper surface composites fabricated via friction stir processing. Aluminum oxide and boron carbide at 1:1 ratio was dispersed onto copper substrate at various volume fractions (5, 1...
Chen, Jie-Sheng
Published in
Frontiers in Materials
Maravić, Tatjana Mazzitelli, Claudia Mancuso, Edoardo Del Bianco, Federico Josić, Uroš Cadenaro, Milena Breschi, Lorenzo Mazzoni, Annalisa
Published in
Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.]
Currently, a classification of resin cements that includes relatively recently formulated ("universal") cements is lacking. Furthermore, the terminology used to define different resin cements in the scientific reports is inconsistent. Accordingly, this work aims to: (i) propose a novel classification of resin composite cements; (ii) disambiguate th...
Peces, Ramón Peces, Carlos Espinosa, Laura Mena, Rocío Blanco, Carolina Tenorio-Castaño, Jair Lapunzina, Pablo Nevado, Julián
Published in
Genes
(1) Background: Gordon syndrome (GS) or familial hyperkalemic hypertension is caused by pathogenic variants in the genes WNK1, WNK4, KLHL3, and CUL3. Patients presented with hypertension, hyperkalemia despite average glomerular filtration rate, hyperchloremic metabolic acidosis, and suppressed plasma renin (PR) activity with normal plasma aldostero...
Chen, Xiaoli Hou, Yu
Published in
Vibroengineering Procedia
Fasteners are widely used in automobile, electronic and other fields, and the demand for high performance fastener materials is increasingly urgent. 10B21 mild steel has the advantages of good plasticity, obvious heat treatment effect and so on. It is used to produce fasteners below grade 9.8. In this paper, the domestic 10B21 boron steel as the re...
Odaa, Sief Aldeen Al-Hadithi, Abdulkader Ismail Mansoor, Yousif A.
Published in
IOP Conference Series: Earth and Environmental Science
Concrete may gain maximum flexural strength to a certain percentage with the inclusion of plastic fiber. Because of the weakening bonding concerning the fiber and cement paste, it loses strength under compression at the same rate it gains. The optimal addition ratio must be established to add Polyethylene Terephthalate (PET) fiber to concrete to im...
Ruland, Jürgen
Published in
Cell
Microbial and danger signals result in inflammasome activation and release of inflammatory cytokines through mechanisms that remain elusive. Cai et al. and Lu et al. show that triggering of inflammasome sensors induces prion-like polymerization of the adaptor ASC into filaments. These structures function as platforms for inflammatory cytokine produ...
Li, Defa Huang, Feng Zhang, Wei Li, Yanzhou Zhou, Binjun
Published in
Materials Research Express
To enhance the hydrogen storage performance of Mg-Ni system alloys, multi-elemental alloys incorporating Y element, namely Mg2-xYxNi0.9Co0.1 (x = 0, 0.1, 0.2, 0.3), were synthesized through ball milling and sintering. The microstructures of Mg2-xYxNi0.9Co0.1 (x = 0, 0.1, 0.2, 0.3) alloys were characterized using XRD and SEM/EDS techniques, and the ...
Ren, Yuan-Yuan Fang, Juan-Li Gong, Rui-Zhi Xiang, Zi-Ling Sun, Peng-Peng
Published in
Frontiers in Sustainable Food Systems
In this study, alkali-soluble polysaccharide from wampee (ASP-W) was prepared and its effect on chitosan-based composite film was investigated. Preliminary characterization of ASP-W showed it was a kind of typical homogeneous polysaccharide, with a molecular weight of 1.5 × 103 KDa. Infrared spectroscopy proved the successful combination of ASP-W w...
