The onboard circuits of EV chargers comprise heat-producing electronic devices such as MOSFETs and diodes for switching and power conversion operations. A heatsink must dissipate this generated heat to extend the devices’ life and prevent component thermal stress or failure. This study primarily investigates the optimal heatsink geometry and pin co...
The development of digital twins for power transformers has become increasingly important to predict possible operating modes and reduce the likelihood of faults. The accuracy of these predictions relies heavily on the numerical models used, which must be both simple and computationally efficient. This work focuses on creating a simplified numerica...
Published in Journal of Electrical Engineering
We present a comprehensive analytical model for laminar flow in a vertically heated rectangular convection loop, with applications to oil cooling in transformer systems. Starting from an integral equation, we apply a quasi-one-dimensional approach to derive equations for both loop velocities and temperature distributions. In this model, we account ...
Published in Journal of Electrical Engineering
We present a comprehensive analytical model for laminar flow in a vertically heated rectangular convection loop, with applications to oil cooling in transformer systems. Starting from an integral equation, we apply a quasi-one-dimensional approach to derive equations for both loop velocities and temperature distributions. In this model, we account ...
A numerical study was carried out to analyze the phenomenon of natural convection in a porous medium saturated with nanofluid. In the study, the boundary element method was used for computational modeling. The fluid flow through a porous matrix is described using the Darcy–Brinkman–Forchheimer momentum equation. In addition, a mathematical model fo...
Published in Frontiers in Chemistry
The present investigation deals with the natural convection (NC) of Al2O3-Cu-water hybrid nanofluid (HNF) within a “ π ”-shaped cavity under the influence of an externally applied magnetic field (MF). Also we studied the porous media with radiative effect as well as common heat transfer for better fitting to real industrial problems. The inverse U ...
Enhancing the energy efficiency of thermal systems reduces their consumption, lowers costs, and reduces undesired environmental impact, thus making these systems more sustainable. The current work introduces a passive method for heat transfer enhancement that is carried out using natural convection by nanofluid. This work introduces a computational...
Many designs for natural-convection heat sinks and semi-empirical correlations have been proposed in the recent years, but they are only valid in a limited range of Elenbaas numbers El and were mostly tested for laminar flows. To alleviate those limits, parametric studies with 2D and quasi-3D models were carried out, in ranges of Grashof numbers up...
The Al alloy melting behavior and interfacial reactions during the steelmaking process of high-Al automotive steel were investigated in this study. The total dissolution time of Al bars (20 × 20 × 80 mm) in molten steel was quite short, decreasing from 21.4 s to 10.0 s with an increase in bath temperature from 1580 to 1620 °C. The Al alloy melting ...
An air-rock bed thermal storage system was designed for small-scale powered generation and analyzed with computational fluid dynamics (CFD) using ANSYS-Fluent simulation. An experimental system was constructed to compare and validate the simulation model results. The storage unit is a cylindrical steel container with granite rock pebbles as a stora...
