Improving the Mechanical Strength of Ductile Cast Iron Welded Joints Using Different Heat Treatments
C for two hours.
C for two hours.
displacement curves. Frictional regime between the indenter and workpiece caused that the region of maximum residual stresses to be located in the subsurface.
OH groups of lignin was the main mechanism in the composites interaction.
The determination of residual stresses is an important issue when it comes to material failure analysis. The variation of global indentation properties, due to the presence of residual stresses, can serve as a guideline for the size and direction of such stresses. One of these global indentation properties, the material hardness, is unfortunately i...
C for 30 min could be used as a fast and cost-effective artificial aging PWHT for the industrial sector. In addition, the repeatability of the PWHTs were demonstrated by studying the effect of waiting time prior to the artificial aging. Finally, it was revealed that a single fast artificial aging process is more beneficial than solubilizing followe...
C. These results allow the manufacturers of industrial tools and components that use this type of steel in the annealed state as a material to define the most suitable quenching and tempering heat treatment to optimize the in-service behavior of these steels.
C in order to investigate the temperature effect. The samples were characterized using SEM, AFM, XPS, Raman Spectroscopy, Ellipsometry, Photometry, and Nano Indentation in order to compare both methods of deposition and provide a careful characterization of such DLC films. We found that the sp3 content and the hardness can be precisely adjusted by ...
0.05). All failure modes were of mixed type (adhesive and composite cohesive). Although all these adhesives were based on the 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) adhesive monomer, the different co-monomers, solvents and catalysts led to variations in their film properties, reactivity and bonding capacity with dentin.