Liu, Huizhi Mei, Qilin Ding, Guomin Xiao, Han Chen, Shuhui Huang, Zhixiong
Published in
e-Polymers
The percolation thresholds of poly ether ether ketone/graphene (PEEK/Gr) composites in most studies are high due to the random distribution of Gr in the matrix. Here, aminated poly-ether-ether-ketone/graphene network (PEEK-NH2/GN) nanocomposites were prepared by electrostatic adsorption of PEEK-NH2 with positive charges and graphene oxide with nega...
Milton-Laskibar, Iñaki Cuevas-Sierra, Amanda Portillo, María P Martínez, J Alfredo
Published in
Biomedicines
Gut microbiota dysbiosis has been described in several metabolic disruptions, such as non-alcoholic fatty liver disease (NAFLD). Administration of resveratrol has been claimed to elicit benefits against NAFLD along with modulating gut microbiota composition. This investigation aims to study the putative mediating role of gut microbiota in the poten...
Iguchi, Hiroko Horita, Masahiro Suda, Jun
Published in
Applied Physics Express
Si ions were implanted at a dose of 1 × 1010 cm−2 into a homoepitaxial n-type GaN layer with a net donor concentration (N D) of 3–8 × 1015 cm−3. The N D in the implanted region increased by 1–3 × 1015 cm−3 after annealing at a temperature greater than 900 °C compared with that for the as-grown homoepitaxial layer. The increase in N D was considerab...
Wang, Hongjiang Zheng, Jiaxuan Yu, Qiuhua Fan, Ziyan Lo, Wai Leung Ambrose Li, Le Wang, Chuhuai
Published in
Frontiers in Neurology
Background Lumbar paraspinal muscle (LPM) is important in spinal stabilization in patients with chronic low back pain (CLBP). However, the electrical properties of LPM in patients with CLBP remain unclear. Electrical impedance myography (EIM) is a novel and non-invasive technique that provides a simple quantitative evaluation of electrical properti...
Okumura, Hironori Watanabe, Yasuhiro Shibata, Tomohiko Yoshizawa, Kohei Uedono, Akira Tokunaga, Hiroki Koseki, Shuuichi Arimura, Tadanobu Suihkonen, Sami Palacios, Tomás
...
Published in
Japanese Journal of Applied Physics
We report on impurity diffusion in ion implanted AlN layers after thermal annealing. Silicon, tin, germanium, and magnesium ions were implanted into single-crystal Al-polar AlN layers grown on sapphire substrates. By annealing at 1600 °C, silicon and magnesium atoms were diffused in the AlN layer, while less change was observed in the distribution ...
zhang;, qi dongliang
Graphene has been widely used due to its excellent electrical, mechanical and chemical properties. Defects produced during its transfer process will seriously affect the performance of graphene devices. In this paper, single-layer graphene was transferred onto glass and silicon dioxide (SiO2) substrates by wet transfer technology, and the square re...
bum, seo
Metal-based transparent top electrodes allow electronic devices to achieve transparency, thereby expanding their application range. Silver nanowire (AgNW)-based transparent electrodes can function as transparent top electrodes, owing to their excellent conductivity and transmittance. However, they require a high-temperature drying process, which da...
jang;, yamujin
We report a novel graphene transfer technique for fabricating graphene field-effect transistors (FETs) that avoids detrimental organic contamination on a graphene surface. Instead of using an organic supporting film like poly(methyl methacrylate) (PMMA) for graphene transfer, Au film is directly deposited on the as-grown graphene substrate. Graphen...
Jeong, D. Park, C. Ko, Y.M.
We propose a mixture factor analysis (MFA) method for estimating missing values in building electric load data. Buildings consume a tremendous amount of energy. Thanks to the recent advances in data technologies such as machine learning and applied statistics, data-driven approaches to making buildings more energy-efficient become a major research ...
kim;, hyelim
This study aimed to manufacture PAN-based conductive yarn using a wet-spinning process. Two types of carbon nanomaterials, multiwall carbon nanotubes (MWCNT) and carbon nanofiber (CNF), were used alone or in a mixture. First, to derive the optimal composite solution condition for the wet spinning process, a composite solution was prepared with carb...