In contact with natural waters, concrete can be exposed to the action of magnesium. Mg-attack on the cement paste leads to dissolution of cementitious phases and formation of brucite, hydrotalcite and/or magnesium silicate hydrates (M-S-H). The knowledge of the properties of the latter is limited. In binders with supplementary cementitious material...
The sandstone of Inkisi, serving as support for infrastructure and construction materials in the city province of Kinshasa, is of interest for geomechanical studies in particular and geological studies in general. Given its outcrop almost everywhere in Kinshasa and its high consumption in the field of buildings and public works, we have set ourselv...
X-ray self-heating is a common by-product of X-ray Free Electron Laser (XFEL) techniques that can affect targets, optics, and other irradiated materials. Diagnosis of heating and induced changes in samples may be performed using the x-ray beam itself as a probe. However, the relationship between conditions created by and inferred from x-ray irradia...
Published in Tenside Surfactants Detergents
The physicochemical properties of cadmium and neodymium soaps (caprylate) have been studied by infrared spectroscopy, X-ray diffraction, and thermal analyses in the solid state. The infrared analysis indicates that the fatty acid is present in a dimeric form due to interactions facilitated by hydrogen bonding. Additionally, it suggests that the soa...
Nanostructured materials containing nickel improve the effectiveness of several applications. This study examines the preparation and characterization of nanostructured Ni80Co17Mo3 alloy powders using high-energy mechanical alloying and subsequent annealing. A 72 h milling process used pure elemental powders to synthesise nanocrystalline FCC-NiCo(M...
Nanostructured materials containing nickel improve the effectiveness of several applications. This study examines the preparation and characterization of nanostructured Ni80Co17Mo3 alloy powders using high-energy mechanical alloying and subsequent annealing. A 72 h milling process used pure elemental powders to synthesise nanocrystalline FCC-NiCo(M...
Bakalářská práce se zabývá analýzou strukturních charakteristik se zaměřením na makroskopická zbytková napětí vzorků z hliníkové slitiny AlSi10Mg, které byly vyrobeny aditivním výrobním procesem, konkrétně selektivním laserovým tavením (SLM). Tato práce vznikla jako součást výzkumu zaměřeného na vytvoření nového numerického modelu metodou konečných...
Published in Frontiers in Chemistry
The rise of antibiotic-resistant bacterial strains has become a critical health concern. According to the World Health Organization, the market introduction of new antibiotics is alarmingly sparse, underscoring the need for novel therapeutic targets. The LytR-CpsA-Psr (LCP) family of proteins, which facilitate the insertion of cell wall glycopolyme...
Published in Journal of The Electrochemical Society
The effects of potential and the presence of B(OH)3 on Pt1-xCox alloy electrodeposition from aqueous chloride-based solutions on Ru substrates was investigated. Films deposited at potentials more reducing than −0.65 V vs SCE were hexagonal close packed and greater than 90% Co (mole basis), and films deposited at potentials more oxidizing than −0.65...
Published in ECS Journal of Solid State Science and Technology
The sol-gel technique has been used to synthesize rare Earth orthoferrite NdFeO3 nanopowders. The present investigation examines how calcination temperatures affect the structural, morphological, and magnetic properties of NdFeO3 orthoferrites. X-ray diffraction studies indicate that there is no discernible difference in the observed structures wit...
