Dodkey, Soumitra M Karandikar, Rishi S Srinidhi, S Gaur, Piyush Managuli, Vishwanath Muthukumar, Chandrasekar Singh, Dalbir Kumar, Ravi Ranjan Suresh, C
Published in
IOP Conference Series: Materials Science and Engineering
The use of composite materials is becoming more widespread by the day. Composite materials are used in a variety of vital applications including aerospace, defense and marine. As a result, it is critical to investigate the mechanical and impact properties of these material-based components. Testing of these materials can provide information such as...
Hollingshaus, Gunnar Reyes, Danielle
TaylorMade Golf Company currently uses a two-piece construction of a forged 4140 steel face and investment cast 8620 steel body for P790 golf club irons. The cast body is welded to the forged face and then the assembly is austenitized, quenched, and tempered to form tempered martensite. It is proposed that a material substitution of 8630 steel for ...
Hedin, Arvid Kudinova, Anna Masso, Linnea
The project aims to develop a methodology to study the variation in properties of wood polymer composites (WPC’s) with/without surface treatment at different humidity conditions. The project aims to investigate the behavior of biocomposites at 50%, 80%and 100% relative humidity (RH). Also to clarify if the hydrophilization effect helps to preserve ...
Ingel, Michael Soldenwagner, Erik Marshall, Austin Schirle, Lauren
Environmental chambers for tensile testing machines are used to study how a multitude of materials behave in extreme temperatures. These chambers provide the necessary information to innovate cutting edge technology for materials in fields such as aerospace. These chambers are often heavy and expensive requiring a significant amount of time and mon...
Höög, Carl
Återvinning och insamling av PET-flaskor startade redan 1994 i Sverige och är en av de grundläggande återvinningsindustrierna.Teknologin har ständigt utvecklas sedan dess och vi har nu nya återvinningsmetoder som kan säkerställa PET-material som uppnår livsmedelskvalitet. Dessutom produktionsmetoder så som Solid-State polymerisation, vilket möjligg...
Lund, Anna
PET har under lång tid använts för flasktillverkning eftersom den är lätt, har goda barriäregenskaper och kan enkelt bearbetas industriellt. På senare tid har miljömedvetenheten ökat i samhället och därmed efterfrågan på återvunnet material, däribland PET-flaskor. Redan idag tillverkas flaskor med helt återvunnen PET. Återvunnen PET har dock kvali...
Wong, Sidney
Composite materials are extensively used as an advanced engineering material, particularly in aerospace, automotive, and buildings industries due to its superior properties such as high strength to weight ratios and resistance to corrosion. As composite materials are rapidly replacing traditional materials in aircraft manufacturing, improved method...
polák, ondřej
Tato práce se zabývá studiem vývoje nového kompozitního materiálu vyráběného pomocí beztlakové technologie. Konkrétně se jedná o technologii rotačního spékání (rotomolding). Předmětem práce je vyrobit vzorky s dvěma různými druhy materiálu a ty následně porovnat pomocí zkoušky na tah. V závěru práce jsou shrnuty výsledky s ohledem na další možnosti...
Yamanaka, Hajime Adelman, Katherine Nakano, Kent
One of the major drawbacks of selective laser melting (SLM) as a form additive manufacturing is that it produces parts with severe residual stress that leads to poor mechanical performance due to the thermal cycling of the printing process. In this project, two different heat treatments (high temperature annealing and low temperature annealing) are...
Lansing, Eric
The air intake manifold is an integral part of modern internal combustion engines. Currently manufactured in glass fibre reinforced PA66, inquiries have been raised regarding a change of material to glass fibre reinforced PP. A new engine project is the purpose for which this proposed material is evaluated. The thermochemical environment in the a...
