Published in Water research
Improved settleability has become an essential feature of new wastewater treatment innovations. To accelerate adoption of such new technologies, improved clarifier models are needed to help with designing and predicting improvement in settleability. In general, the level of mathematics of settling clarifier models has gone far beyond the level of e...
An optimized design for a 210 kg alloy, Ti-Mn alloy based hydrogen storage system for stationary application is presented. A majority of the studies on metal hydride hydrogen systems reported in literature are based on system scale less than 10 kg, leaving questions on the design and performance of large-scale systems unanswered. On the basis of se...
The hydrodynamics and the flow field in an agitated vessel were measured using 2-D time resolved particle image velocimetry (2-D TR PIV). The experiments were carried out in fully baffled cylindrical flat bottom vessels 300 and 400 mm in inner diameter. The 300 mm inner diameter tank was agitated by a Rushton turbine 100 mm in diameter, and the 400...
© 2018 by the authors. This paper assesses the effect of climate change on reliability of rainwater harvesting systems for Kabarole district, Uganda, as predicted by 6 best performing global circulation models (GCMs). A daily water balance model was used to simulate the performance of a rainwater harvesting system using historical daily rainfall da...
Published in Water research
Advanced 1-D models for Secondary Settling Tanks (SSTs) explicitly account for several phenomena that influence the settling process (such as hindered settling and compression settling). For each of these phenomena a valid mathematical expression needs to be selected and its parameters calibrated to obtain a model that can be used for operation and...
A model is proposed to predict the weathering of LNG stored in containment tanks . It dispenses with a standard approximation where the temperature of the generated vapour within the tank is assumed to be the same as that of the stored LNG. Instead , it treats the heat influx from the surroundings into the vapour and liquid phases separately and al...
Published in Water science and technology : a journal of the International Association on Water Pollution Research
An improved one-dimensional (1-D) model for the secondary clarifier, i.e. the Bürger-Diehl model, was recently presented. The decisive difference to traditional layer models is that every detail of the implementation is in accordance with the theory of partial differential equations. The Bürger-Diehl model allows accounting for hindered and compres...
