Binomairah, Amran Abdullah, Azizi Khoo, Bee Ee Mahdavipour, Zeinab Teo, Teow Wee Mohd Noor, Nor Shahirah Abdullah, Mohd Zaid
Published in
EPJ Photovoltaics
Two common defects encountered during manufacturing of crystalline silicon solar cells are microcrack and dark spot or dark region. The microcrack in particular is a major threat to module performance since it is responsible for most PV failures and other types of damage in the field. On the other hand, dark region in which one cell or part of the ...
Kumari, Raman Mamta, Kumar, Rahul Singh, V N
Published in
Heliyon
This theoretical investigation's primary goal is to investigate how the Sb2Se3 solar cell's performance may be improved. Here, SnTe, as an innovative back surface field (BSF) layer, has been added between the rear contact (Mo) and absorber layer (Sb2Se3). Above the absorber layer, the structure comprises a thin CdS buffer layer. For each layer of t...
Amanati Manbar, H Hosseini, Z Ghanbari, T Moshksar, E Khodapanah, M
Published in
Heliyon
Tin-based perovskite solar cells (T-PSCs) are introduced as the next generation of valid and environment-friendly photovoltaic (PV) cells for near-future commercialization. However, there are some issues limiting T-PSCs including their instability, low efficiency, and use of toxic processing solvents. Among all these barriers, instability and early...
Sakr, Mahmoud A S Kana, Maram T H Abou
Published in
Journal of fluorescence
In this manuscript, we report four series for 1,2,4-triazine derivatives as dye-sensitized solar cells (DSSCs). Density functional theory (DFT) methods via utilizing Becke's three-parameter functional and LeeeYangeParr functional (B3LYP) level with 6-31G (d, p) basis set to investigate their modeling molecular structures. Optimized molecular struct...
Lu, Liufeige
Published in
E3S Web of Conferences
With the rapid advancement of economy, human’s demand for energy continues to grow, and energy shortage has become the primary problem hindering further economic development. Therefore, changing the existing energy structure and developing and utilizing sustainable clean energy are the research directions of all countries in the world. Perovskite s...
Luo, Y.-D. Chen, M.-D. Tang, R. Azam, M. Chen, S. Zheng, Z.-H. Su, Z.-H. Fan, P. Ma, H.-L. Liang, G.-X.
...
Antimony selenide (Sb2Se3) have developed as an environmental-friendly photoactive materials for low-cost photovoltaics due to its non-toxic elements and excellent optoelectronic properties. However, chemical bath deposited (CBD) CdS thin film was generally employed as electron transport layer (ETL) in substrate or superstrate structured Sb2Se3 sol...
Sankaranarayanan, Sowmya Kathiravan, Inbarajan Balasundaram, Janarthanan Shkir, Mohd AlFaify, Salem
Published in
Environmental science and pollution research international
Dye-sensitized solar cells (DSSCs) were devised with the sensitizers prepared from the leaves and flowers of Amaranthus cruentus. Fresh and dried leaves were employed for extracting the dye sensitizers. Acetone, ethanol, and deionized water were used as solvents for the extraction process. A sum of nine dyes was prepared. For all the extracted dyes...
Maity, Nishith
Dye sensitized solar cell (DSSC) is one of the available renewable energy sources which are intensively investigated. There are many directions of research to improve the efficiency of these DSSCs. In this thesis, we have chosen to focus on the photosensitizers and the electrolytes with the objective of characterizing the polarity and the reorienta...
Haruta, Yuki
京都大学 / 新制・課程博士 / 博士(エネルギー科学) / 甲第24010号 / エネ博第446号 / 新制||エネ||84(附属図書館) / 京都大学大学院エネルギー科学研究科エネルギー応用科学専攻 / (主査)教授 平藤 哲司, 教授 土井 俊哉, 教授 藤本 仁 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DFAM
Venugopalan Kartha, Chithira Rehspringer, Jean Luc Muller, Dominique Roques, Stéphane Bartringer, Jérémy Ferblantier, Gerald Slaoui, Abdelilah Fix, Thomas
Cuprous oxide materials are of growing interest for optoelectronic devices and were produced by several chemical and physical methods. Here, we report on the structural, optical, and electrical properties of CuxO thin films prepared by the pulsed laser deposition technique. The substrate temperature, as well as the oxygen partial pressure in the de...
