Coulié, Karine Rahajandraibe, Wenceslas Ottaviani, Laurent
Published in
EPJ Web of Conferences
A particle detection chain based on a CMOSSOI VCO circuit associated to a 3x5 matrix of detection is presented. The solution is optimized for the recognition and tracking of low energy particles. Two ions are considered: an alpha and a lithium. These two ions were chosen because there are the secondary particles generated by the neutronboron 10 int...
Sohail, Mohammed Venkata Prasad, M.G. Krishna Vamshi, S. Mohan Chandu, S. Lata Tripathi, Suman Bindu Madhavi, K.
Published in
ITM Web of Conferences
The aquarist feeds the fish in the aquarium tanks which demands a proper setup for maintenance. The challenges faced are alterations in water quality, fish care, temperature regulation, light control, and difficulty in manually monitoring the aquarium’s conditions. Consequently, close monitoring of the physical parameters and improvement of water c...
Aggarwal, Rajiv Gunaseelan, Vikneswaran Manual, Delitia Sanker, Manoj Prabaaker, Sabari
Published in
Indian journal of pediatrics
To evaluate the ability of the Nemocare Raksha (NR), an internet of things (IoT)-enabled device, to continuously monitor vitals for 6 h and its safety in newborns. The accuracy of the device was also compared with the readings from the standard device used in the pediatric ward. Forty neonates (either gender) weighing ≥ 1.5 kg were included in the ...
Ruiz Solernou, Nicolás
[ES] El presente trabajo de final de máster tiene como objetivo la adaptación de un motor de encendido provocado (MEP) para que funcione con hidrógeno. Para ello, se realizará un proyecto completo que incluye la adquisición, modificación e instalación del motor en un banco de pruebas. En una primera etapa del proyecto se definen los objetivos y se ...
Ciges Puig, Antonio
[ES] El objetivo principal de este trabajo consiste en automatizar una torre de refrigeración para la mejora de una nave industrial de té mediante un autómata programable. La automatización de la torre de refrigeración tendrá en cuenta el control de la velocidad, marcha o paro de una serie de equipos en función de unas analógicas de presión y tempe...
Martí Llorens, Javier Andrés
[ES] El proyecto consiste en el diseño, simulación y realización de un prototipo funcional de un sensor de frecuencia optoelectrónico para instrumentos musicales de cuerda que proporcione una salida para el usuario de INST (100mV) con etapa de filtrado, ecualización y control de volumen. En proyecto se enmarca dentro del ODS 4, en la meta 4.7: la c...
López Sacristán, Xavier
[ES] El creciente desarrollo de la automatización en el sector de la construcción hace necesaria la aparición de dispositivos capaces de adquirir información sobre los productos y la maquinaria que se emplean. La monitorización es fundamental en los sistemas automatizados para tener un control continuo de los procesos que tienen lugar. Uno de los e...
Parasuraman, Guruprasadh Jagannathan Vishnuraj, Ramakrishnan Kannankuzhiyil, Surjith Govindaraj, Mohankumar Biji, Sabarinath Sasikumar Rangarajan, Murali
Published in
Environmental science and pollution research international
Large-scale use of chemical fertilizers has resulted in the contamination of agricultural runoff waters by soil macronutrients NPK, whose detection is of significant interest. This work reports the determination of macronutrients in the form of urea (N), orthophosphate PO43- (P), and potassium K+ (K) in simulated agricultural runoff waters. Their s...
Nicard, Cyril Farin, Maxime Moulin, Emmanuel Balloy, David Proriol Serre, Ingrid
This paper investigates a Non-Destructive Testing based on ultrasonic Coda Wave Interferometry technique to determine if it can be an efficient way to continuously and quantitatively measure the thickness loss due to corrosion on an S355 grade steel in 3 wt% NaCl distilled water. To do so, several electrochemical experiments in open circuit potenti...
Zolgharnein, J Goudarzy, F Ghasemi, J B
Published in
Journal of fluorescence
In this research, carbon nitride nanocomposite coupled with Fe3O4 and CuWO4 was thermally synthesized and characterized by different techniques, including SEM, TEM, XRD, EDX, and FTIR. Due to sodium valproate's luminescence quenching of this nanocomposite, a reliable, accurate, sensitive, selective, and fast-acting sodium valproate assay was propos...
