Revisiting polymer tribology for heavy duty application
Influence of solid lubricants on tribological properties of polyetheretherketone (PEEK)
Mechanical and fretting wear behavior of novel (W,Ti)C-Co cermets
5
Mechanical and fretting wear behavior of novel (W,Ti)C-Co cermets
5
Mechanical and fretting wear behavior of novel (W,Ti)C-Co cermets
5
Tribological behaviour of polymeric materials in water-lubricated contacts
This study aims at investigating the tribological behaviour of several unfilled polymer materials sliding against 316L stainless steel in distilled water. The tests were carried out in a unidirectional pin-on-disc configuration with an initial apparent contact pressure of 5MPa at room temperature. The worn surfaces were examined using scanning elec...
Room temperature dry and lubricant wear behaviors of Al2O3f/SiCp/Al hybrid metal matrix composites
X / 1 / 33 / 35
Influence of secondary phases on the tribological response of electro-discharge machined zirconia-based composites again...
Tribological properties of PTFE-filled thermoplastic polyimide at high load, velocity, and temperature
Influence of internal lubricants (PTFE and silicon oil) in short carbon fibre-reinforced polyimide composites on perform...
Short carbon fibre-reinforced thermoplastic polyimides (30 wt%) often show high and unstable coefficients of friction. In this study, the effects of internal lubrication by polytetrafluoroethylene (PTFE) (15 wt%) or silicon oil (15 wt%) have been investigated using a reciprocating cylinder-on-plate test under 50-100 N normal loads and 0.3-1.2 m/s s...
