The optimization of process parameters represents one of the major drawbacks of selective laser sintering (SLS) technology since it is largely empirical and based on performing a series of trial-and-error builds. This approach is time con-suming, costly, and it ignores the properties of starting powders. This paper provides new results into the pre...
Published in Journal of the mechanical behavior of biomedical materials
Plasma-based treatment is a prevalent strategy to alter biological response and enhance biomaterial coating quality at the surfaces of biomedical devices and implants, especially polymeric materials. Plasma, an ionized gas, is often thought to have negligible effects on the bulk properties of prosthetic substrates given that it alters the surface c...
Published in Fibers and Polymers
As the use of textile polypropylene (PP) fibers becomes more common in commercial textiles and sportswear, the investigation of the effects of UV-curable ink on the heat-sensitive PP knitted fabrics is crucial to optimize functional clothing design. This study investigated the effects of UV-curable ink on the heat-sensitive PP knitted fabrics when ...
Published in Fibers and Polymers
The crystalline behavior and mechanical properties of PP/GF (glass fibers) composites molded by rapid heat cycle molding (RHCM) and conventional injection molding (CIM) were compared. SEM, DSC and XRD were utilized to study crystallization behavior of PP and PP/GF composites. Furthermore, universal testing machine was employed to investigate the me...
Published in Fibers and Polymers
In the present work, a systematic study of the variables affecting the production of polypropylene (PP)/poly(trimethylene terephthalate) (PTT) blend fibers such as the PTT and PP-g-MA compatibleizer ratios and take-up speed in the melt-spinning process was done. Modeling of the melt-spinning process was carried out by using a statistical approach b...
Published in Journal of the mechanical behavior of biomedical materials
Surgical mesh products made from polypropylene (PP) have been extensively used in the treatment of stress urinary incontinence, pelvic organ prolapse and other conditions. Since the onset of the use of such implants, major complications have been reported. Mesh erosion, where neighbouring tissues are worn from the rubbing of mesh, occurs in a signi...
Published in Environmental research
In this study, red mud (RM), a highly alkaline waste generated from alumina production industries, was used as a catalytic material for both fast copyrolysis of organosolv lignin (OL) and polypropylene (PP) and toluene removal under ozone at room temperature. The RM was pretreated with HCl to investigate the effect of alkalinity. In the catalytic f...
Published in Water research
The ubiquitous distribution of microplastics (MPs) leads to inevitable interactions with the toxic pollutants present in the environment including metal-oxide nanoparticles. This study investigates the interaction of CeO2 nanoparticles (CeNPs) with MPs generated from a disposable plastic container. Further, rough MPs (R-MPs), generated through mech...
Published in Journal of Polymer Research
In this work, the self-reinforced polypropylene (PP)/noil ramie fiber (NRF) composites were prepared by the solid-state extrusion method. And the effect of die structure such as draw ratio and conical angle on the morphology, thermal and mechanical properties of samples was investigated. The results indicated that the solid-state deformation of PP/...
Published in Hernia : the journal of hernias and abdominal wall surgery
Aim of the study is to compare macroporous (> 1 mm2) polytetrafluoroethylene mesh (LP-PTFE) versus microporous (
