The control and design of kites for airborne wind energy requires an extensive understanding of kite dynamics. While these have been thoroughly analyzed with fluid-structure interaction models, very little experimental data exists to validate them. Specifically, most experiments on kites so far have not obtained local measurements that can be compa...
Tato bakalářská práce se zabývá fotogrammetrickou dokumentací podloubí domů Havelská čp.506/507 na Praze 1. V práci je popsán průběh od terénních a kancelářských prací až po tvorbu výsledných výstupů. Těmi je výsledný 3D model celé dokumentované části objektu a z něj vytvořená dílčí ortofota zpracovaná do výkresů v měřítku 1:20. / This bachelor the...
Tato diplomová práce se zabývá fotogrammetrickým zaměřením pozůstatků černé kuchyně a navazujících prostor v Domě u Sixtů v budově dvorního křídla. Komplex budov se nachází v těsné blízkosti Staroměstského náměstí v Praze. Budovy prochází celkovou rekonstrukcí. Ze měřených dat byly zpracovány 3D modely místností, ortofota jednotlivých stěn a vektor...
Published in Journal of Mountain Science
Digital elevation models (DEMs) can be quickly and conveniently generated using very high resolution (VHR) satellite stereo images. Previous studies have evaluated and compared DEM accuracy based on VHR satellite stereo pairs collected by different satellite sensors. However, few studies analyzed the accuracy of a DEM based on stereo image pairs fr...
Published in Arabian Journal of Geosciences
Monitoring and characterization of rock face is an important aspect of field survey in order to meet the safety requirements for any rock engineering activity. Currently, most of the rock face mapping activities are carried out using manual surveying with compass-clinometers. Laser scanners coupled with their inbuilt commercial software packages pr...
Three-dimensional (3D) scanning technologies, such as medical imaging and surface scanning, have important applications for capturing patient anatomy to create personalised prosthetics. Digital approaches for capturing anatomical detail as opposed to traditional, invasive impression techniques significantly reduces turnaround times and lower produc...
Published in International journal of legal medicine
Identifying the skeletal remains of an unidentified individual is a priority for the medico-legal system because identification increases the chances of finding the person responsible and provides closure to the family. The purpose of this research was to develop a combined morphological and metric cranial sex assessment method using 3D technology ...
Published in Journal of Applied Engineering Sciences
Currently in Transylvania there are over 600 castles, considered monuments belonging to the world or national heritage. Some of them have disappeared, some are in an advanced degradation, the vast majority being in different stages of degradation, but recoverable, through very expensive investments. The first condition for them to start a program o...
This document follows up the release of the recommendation of the Consortium 3D for the Humanities available in open access on the HAL platform in 2018. These first recommendations were mostly included into the guide “Guide pour la rédaction d’un cahier des charges de numérisation en 3D” published by the French Ministry of Culture in the context of...
Savanna is one of the main African ecosystems. The tree community in the savanna is a key element and provides many ecosystem services. Unmanned aerial vehicles (UAVs) combined with photogrammetric analysis are useful tools to produce accurate 3D maps, which, in turn, help describe the structure of the tree populations. The purpose of this study wa...
