Storage-capacity assessment for CO2 captured from FCB power plants in France - Aquifer storage vs ECBM recovery
The IKARUS-Project: Energytechnical perspectives for Germany Final report / Das IKARUS-Projekt: Energietechnische Perspe...
Book with the following topics and singularily recorded: IKARUS -Instruments for climate gas reduction strategies; Macroeconomic information system; IKARUS - Energy scenarios until 2030; Chances and perspective for innovative power plant systems; Stronger utilization of renewable energy sources; Efficient utilization of energy in industry and trade...
Klaerung des Betriebsverhaltens von Schweissverbindungen zwischen martensitischen und austenitischen Rohren bei Temperat...
Germany
CO_2store The Valleys case study on CO_2 capture, transport and storage
SIGLE / Available from British Library Document Supply Centre- DSC:3278. 4308(340) / BLDSC - British Library Document Supply Centre / GB / United Kingdom
HTS-SQUIDS in the power plant: Decrease of the SQUID system's sensitivity against disturbances Final report / HTS-SQUIDs...
The aim of the project was the development of a measurement system, based on SQUIDs (Superconducting Quantum Interference Detector) using high-temperature superconductors, which is usable for NDE (non-destructive evaluation) in industrial environment. To realize this task, both - new SQUID gradiometers and a new SQUID electronics - have been develo...
CO_2store The Valleys case study on CO_2 capture, transport and storage
United Kingdom
Performance of welds between martensitic and austenitic tubes at temperatures up to 650 C under combined thermal and mec...
Welds between the martensitic 9% Cr steels T91 and E911 and the austenitic steel 1.4910 were to be constructed for temperatures up to 650 C and pressures up to 330 bar. This was to be achieved by the following steps: 1. Selection of suitable welded joints; b) optimisation of weld geometry; c) description of the thermal and mechanical characteristic...
HTS SQUIDS in the power plant: HTS eddy current sensors for non destructive testing in comparison Final report / HTS-SQU...
The aim of the project was to develop hybrid magnetic field sensors and to compare those with HTS SQUID Sensors in the field of non destructive testing on power plant relevant materials and test structures. The project started with commercial available converters combined with magnetic antenna in order to find the current state of technology and to...
HTS-SQUIDs im Kraftwerk: Verringerung der Stoerfeldempfindlichkeit des SQUID-Systems Abschlussbericht
Germany
Das IKARUS-Projekt: Energietechnische Perspektiven fuer Deutschland Abschlussbericht
Germany
