Material Engineering of 3D-Printed Silicon Steel Alloys for the Next Generation of Electrical Machines and Sustainable E...
status: accepted
Study on spin-orbit torque effects in metallic bi-layer and single-layer systems / 金属二層及び単層構造におけるスピン軌道トルク効果に関する研究
付記する学位プログラム名: 京都大学卓越大学院プログラム「先端光・電子デバイス創成学」 / 京都大学 / 新制・課程博士 / 博士(工学) / 甲第24891号 / 工博第5171号 / 京都大学大学院工学研究科電子工学専攻 / (主査)教授 白石 誠司, 准教授 掛谷 一弘, 教授 小野 輝男, 教授 森山 貴広 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM
Evaluation of 3D-Printed Magnetic Materials For Additively-Manufactured Electrical Machines
...
status: published
Material engineering of 3D-printed silicon steel alloys for the next generation of electrical machines and sustainable e...
Recently, there has been a growing need for sustainable and efficient electromobility. Also, the interest in highly-flexible resource-saving production has been increasing. To this aim, standardized manufacturing of electrified powertrains is being replaced by scalable production solutions. With this being said, additive manufacturing (AM) technolo...
Efficient capture of U(VI) by magnetic Zr(IV)-ethylenediamine tetramethylene phosphonic acid inorganic-organic hybrid.
Published in Environmental science and pollution research international
The separation of magnetic adsorbents from aqueous solutions is made simple by using an external magnetic field. Herein, magnetic Zr(IV)-ethylenediamine tetramethylene phosphonic acid (EDTMPA) hybrids (MZrOP-x-T, x, and T were the different quality of Fe3O4@C and temperature in the synthesis process, respectively). A study was conducted on the uses...
A water-compatible magnetic dual-template molecularly imprinted polymer fabricated from a ternary biobased deep eutectic...
Published in Food chemistry
A water-compatible magnetic dual template molecularly imprinted polymer using a ternary deep eutectic solvent as a functional monomer was synthesized via a green synthesis method based on one-pot reversible addition/fragmentation chain transfer precipitation polymerization. The resulting material, DES-MDMIP, shows excellent adsorption capacity (218...
Characterization of magnetic materials at extreme ranges of field, temperature, and permeability
L'abstract è presente nell'allegato / the abstract is in the attachment
Design and Demonstration of Embedded Inductors for High-Voltage Integrated Voltage Regulators
Increased functionalities and computational capacity of today’s electronic systems have resulted in the need for higher power density. Current multi-stage 48 V to 1 V power delivery networks shows efficiencies of 75% or lower. Substrate-embedded inductors can enable the miniaturization of power modules and Integrated Voltage Regulators (IVRs) makin...
A synthetic guide toward the tailored production of magnetic iron oxide nanoparticles
In the last decades, magnetic ceramics are very appealing materials that find applicationsin several technologic fields. Among these, iron oxides nanoparticles are the main relevantones due to their low-cost as naturally occurring substrates. However, depending on theapplication, it can be necessary to induce a specific shape and size control over ...
Reactive magnetron sputtered–assisted deposition of nanocomposite thin films with tuneable magnetic, electrical and inte...
Published in Journal of Nanoparticle Research
In this work, different magnetic thin films of Ni, NiFe and NiFe2O4 are deposited on the SiO2 substrate using sputtering technique. Our experiments confirmed that thin films possess a good nanocrystalline structure. The key deposition parameters controlling their magnetic properties are sheet resistivity, crystalline structure and microtopography o...
