Solvometallurgical Process for the Recovery of Copper from Chrysocolla in Monoethanolamine
status: Published online
In-situ fabrication of Si/FeSi2@C NPs with volume control effect by fluidized bed chemical vapor deposition as anode mat...
Silicon (Si) has been proven to be the most potential anode material for the next-generation lithium-ion batteries (LIBs) because of its superior theoretical capacity (similar to 4200 mAh g-1). However, the huge volume changes, unstable solid-state interphase (SEI) layers, and large internal stresses upon the lithiation process severely limit the p...
In-situ fabrication of Si/FeSi2@C NPs with volume control effect by fluidized bed chemical vapor deposition as anode mat...
Silicon (Si) has been proven to be the most potential anode material for the next-generation lithium-ion batteries (LIBs) because of its superior theoretical capacity (similar to 4200 mAh g-1). However, the huge volume changes, unstable solid-state interphase (SEI) layers, and large internal stresses upon the lithiation process severely limit the p...
Layering Charged Polymers Enable Highly Integrated High‐Capacity Battery Anodes
High-capacity anode materials are promising candidates for increasing the energy density of lithium (Li)-ion batteries due to their high theoretical capacities. However, a rapid capacity fading due to the huge volume changes during charge-discharge cycles limits practical applications. Herein, a layering-charged polymeric binder is introduced that ...
Analyzing the effect of Li/Ni intermixing on Ni-rich layered cathode structures using atomistic simulation of the Li–Ni–...
© 2022 Elsevier B.V.LiNixMnyCozO2 (x + y + z = 1, x > 0.6) Ni-rich layered structures are the most investigated and used cathode materials these days due to their high energy density. However, it is hard to avoid Li/Ni intermixing during synthesis and the charge/discharge cycle. This intermixing is known to degrade the cathode by inducing anisotrop...
Adsorption and immobilization of phosphorus from eutrophic seawater and sediment using attapulgite - Behavior and mechan...
The adsorption behavior of phosphorus on raw sediment (RS), attapulgite (AT), purified attapulgite (PAT) and AT/PAT-amended sediments conforms to the Langmuir, pseudo first-order kinetics and liquid film diffusion model. The adsorption process is spontaneous and monolayer adsorption, and the adsorption rate is mainly controlled by liquid film diffu...
Adsorption and immobilization of phosphorus from eutrophic seawater and sediment using attapulgite - Behavior and mechan...
The adsorption behavior of phosphorus on raw sediment (RS), attapulgite (AT), purified attapulgite (PAT) and AT/PAT-amended sediments conforms to the Langmuir, pseudo first-order kinetics and liquid film diffusion model. The adsorption process is spontaneous and monolayer adsorption, and the adsorption rate is mainly controlled by liquid film diffu...
Corrosion Behavior of Cobalt Oxide and Lithium Carbonate on Mullite-Cordierite Saggar Used for Lithium Battery Cathode M...
Mullite-cordierite ceramic saggar is a necessary consumable material used in the synthesis process of LiCoO2 that is easily eroded during application. In our study, we systematically investigated the characteristics and surface corrosion behavior of waste saggar samples. We divided the cross sections of waste saggar into the attached layer, hardene...
Evaluation of alternative gas chromatographic and mass spectrometric behaviour of trimethylsilyl-derivatives of non-hydr...
Sulfated metabolites have shown to have potential as long-term markers (LTMs) of anabolic-androgenic steroid (AAS) abuse. The compatibility of gas chromatography-mass spectrometry (GC-MS) with trimethylsilyl (TMS)-derivatives of non-hydrolysed sulfated steroids has been demonstrated, where, after derivatisation, generally, two closely eluting isome...
Corrosion Behavior of Cobalt Oxide and Lithium Carbonate on Mullite-Cordierite Saggar Used for Lithium Battery Cathode M...
Mullite-cordierite ceramic saggar is a necessary consumable material used in the synthesis process of LiCoO2 that is easily eroded during application. In our study, we systematically investigated the characteristics and surface corrosion behavior of waste saggar samples. We divided the cross sections of waste saggar into the attached layer, hardene...
