Alternating electric field-based ionic control and layer-by-layer assembly of anion exchange membranes for enhancing tar...
status: accepted
The integration of electronic circuits in plastics using injection technologies: a literature review
Published in Flexible and Printed Electronics
A great deal of attention has been paid in recent years to the integration of two and three-dimensional integrated electronic parts into plastics, both for their potential applications in modern human lives and for their outstanding properties, which include the ability to reduce product weight and space while increasing product reliability. The de...
Inverted organic photovoltaics with a solution-processed Mg-doped ZnO electron transport layer annealed at 150 degrees C...
The use of dopants is an effective strategy to improve ZnO electron transport layers (ETLs) for application in solution-processed opto-electronic devices. Mg, in particular, has shown significant promise as a dopant and Mg-doped ZnO ETLs have been used to enhance the performance of a number of solution-processed light-emitting diodes and photovolta...
Hydrogel supported positively charged ultrathin polyamide layer with antimicrobial properties via Ag modification
...
status: published
NiCo2O4 Nanofiber Cluster Assisted by NH4F Growing on 3D Graphene as a Binder-Free Electrode for Lithium-Ion Batteries
High-performance anode materials are crucial for developing next-generation high-energy-density lithium-ion batteries (LIBs). In previous reports, NiCo2O4 showed great potential as a candidate anode material for the next-generation LIBs. In this article, we fabricated nanofiber clusters of NiCo2O4-decorated 3D [email protected] foam ([email protected]) via c...
NiCo2O4 Nanofiber Cluster Assisted by NH4F Growing on 3D Graphene as a Binder-Free Electrode for Lithium-Ion Batteries
High-performance anode materials are crucial for developing next-generation high-energy-density lithium-ion batteries (LIBs). In previous reports, NiCo2O4 showed great potential as a candidate anode material for the next-generation LIBs. In this article, we fabricated nanofiber clusters of NiCo2O4-decorated 3D [email protected] foam ([email protected]) via c...
Super-hydrophobic PTFE hollow fiber membrane fabricated by electrospinning of Pullulan/PTFE emulsion for membrane deamin...
Polytetrafluoroethylene (PTFE) is increasingly used in membrane applications due to its excellent thermal stability, resistance to chemical degradation and strong hydrophobicity. However, it is difficult to prepare high flux membranes by conventional technology due to its high melt viscosity and solvent resistance. Here, a environment-friendly tech...
Super-hydrophobic PTFE hollow fiber membrane fabricated by electrospinning of Pullulan/PTFE emulsion for membrane deamin...
Polytetrafluoroethylene (PTFE) is increasingly used in membrane applications due to its excellent thermal stability, resistance to chemical degradation and strong hydrophobicity. However, it is difficult to prepare high flux membranes by conventional technology due to its high melt viscosity and solvent resistance. Here, a environment-friendly tech...
High-performance multi-stage internally-cooled liquid desiccant dehumidifier for high gas-liquid flow ratios
Liquid desiccant dehumidification provides a pathway to high-flow air pretreatment of air compressors for en-ergy savings. However, high air-to-solution flow ratios (i.e., over 4.0) may result in an unacceptable decrease in dehumidification effectiveness, and few studies have managed to overcome this challenge. This study aims to experimentally dem...
Ophthalmic sensing technologies for ocular disease diagnostics
Point-of-care diagnosis and personalized treatments are critical in ocular physiology and disease. Continuous sampling of tear fluid for ocular diagnosis is a need for further exploration. Several techniques have been developed for possible ophthalmological applications, from traditional spectroscopies to wearable sensors. Contact lenses are common...
