Shoaib Rafiq, Muhammad Muhammad Ali, Hafiz Sultan, Amir
Published in
E3S Web of Conferences
Coolant plays important characteristic in automobile industry to prevent failure and damage by balancing the temperature. Due to this approach, coolants are being used as new thermal fluid to study the heat transfer coefficient performance. This study consists of an experimental investigation of internal convective heat transfer of 50:50 Water-Ethy...
Steele, J Ames, J Augustine, MP
The chemical shift difference, Δσ, between the methylene and hydroxyl protons in the high resolution 1 H nuclear magnetic resonance spectrum of ethylene glycol is shown to be pressure dependent. The equilibrium Δσ values for ethylene glycol are reported as a function of temperature and pressure between ambient conditions, 323 K and 2 kbar, respecti...
Li, Jia Ha, Noel S Liu, Tingyi 'Leo' van Dam, R Michael 'cj' Kim, Chang-Jin
The ability to manipulate droplets on a substrate using electric signals1-known as digital microfluidics-is used in optical2,3, biomedical4,5, thermal6 and electronic7 applications and has led to commercially available liquid lenses8 and diagnostics kits9,10. Such electrical actuation is mainly achieved by electrowetting, with droplets attracted to...
Gallagher, Nicholas Edwards, Frank J.
Published in
Advanced Journal of Emergency Medicine
Context: This review discusses the range of clinical presentations seen with poisonings by the major toxic alcohols--methanol, ethylene glycol, and isopropyl alcohol. It outlines a straightforward diagnostic strategy and discusses in detail the current treatment recommendations. Evidence acquisition: The authors conducted a literature search of pri...
Zhuang, Jin-Liang Mao, Hui-Ling Wang, Chen Liu, Xiang-Yue Zhang, Yu Gao, Ge Hu, Yan-Na Cheng, Hu Du, Xuan
Highly branched Pt-Ni nanoalloys with varied chemical compositions were prepared by one-pot solvothermal synthesis. The morphology, structure, composition and catalytic properties of Pt-Ni nanoalloys were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), electrochemical cyclic voltammetry and chronoamperometry. The d...
Zhuang, Jin-Liang Mao, Hui-Ling Wang, Chen Liu, Xiang-Yue Zhang, Yu Gao, Ge Hu, Yan-Na Cheng, Hu Du, Xuan
Highly branched Pt-Ni nanoalloys with varied chemical compositions were prepared by one-pot solvothermal synthesis. The morphology, structure, composition and catalytic properties of Pt-Ni nanoalloys were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), electrochemical cyclic voltammetry and chronoamperometry. The d...
Zhang, Chanjuan Wang, Liguo Liu, Jiaju Yang, Yanmi He, Peng Cao, Yan Chen, Jiaqiang Li, Huiquan
The hydrogenation of ethylene carbonate to co-produce commodity methanol and ethylene glycol has attracted growing interests due to the potential chemical utilization of CO2 in large scale. In this work, we report a novel and facile protocol for the preparation of mesoporous [email protected] catalysts and successfully applied the as-synthesized catalysts in...
Liu, Jiaju He, Peng Wang, Liguo Liu, Hui Cao, Yan Li, Huiquan
The efficient synthesis of methanol and ethylene glycol via the chemoselective hydrogenation of ethylene carbonate (EC) is important for the sustainable utilization of CO2 to produce commodity chemicals and fuels. In this work, a series of P-cyclodextrin-modified Cu/SiO2 catalysts were prepared by ammonia evaporation method for the selective hydrog...
Chen, Liwei Xu, Jumei Xue, Weilan Zeng, Zuoxiang
Published in
Korean Journal of Chemical Engineering
An eight-step mechanism of esterification reaction between adipic acid (AA) and ethylene glycol (EG) catalyzed by tetrabutyl titanate [Ti(OBu)4] was studied in detail. The kinetic data for the esterification reaction between AA and EG catalyzed by tetrabutyl titanate [Ti(OBu)4] were measured in the temperature range of 403 K-433 K. A second-order k...
Wang, Xinyue Feng, Gu-yu Ge, Ming-qiao
Published in
Journal of Materials Science
In this study, blend fibers composed of poly(vinyl alcohol) and poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) were prepared via wet-spinning technology. Ethylene glycol (EG) vapor annealing was employed to improve the electrical conductivity and tensile properties of blend fibers. The effects of EG vapor annealing on structur...