Since more than 100 years, the adsorption of the radioactive noble gas radon (222Rn) is performed on activated charcoal at cryogenic temperatures. There is little-if any-progress in the field of radon adsorption at ambient conditions to facilitate the development of simple and compact radon adsorption systems. We report here on the truly remarkable...
Published in Beilstein journal of nanotechnology
In this contribution, the preparation of hierarchically structured ETS-10-based catalysts exhibiting notably higher activity in the conversion of triolein with methanol compared to microporous titanosilicate is presented. Triolein, together with its unsaturated analog trilinolein, represent the most prevalent triglycerides in oils. The introduction...
This PhD project studied the caesium and strontium removal capacities of six nanoporous materials. Indeed, it was linked in with the SIXEP plant present at Sellafield site, UK, which is currently using natural clinoptilolite, originally mined from the Mojave Desert, to remove radioactive caesium and strontium ions from wastewater effluents. At the ...
Published in Zeitschrift für Kristallographie - Crystalline Materials
In this paper, we present a systematic quantum-mechanical density functional theory (DFT) study of adsorption of small gas molecules in cation-exchanged Engelhard titanosilicate ETS-10 crystalline materials. Adsorbates with a range of polarities were considered, ranging from polar (H2O), quadrupolar (CO2 and N2), to apolar (CH4) atmospheric gases. ...
Published in Korean Journal of Chemical Engineering
CO2 capture from humid flue gas is always costly due to the irreplaceable pretreatment of dehydration in current processes, which creates an urgent demand for moisture-insensitive adsorbents with considerable CO2 uptakes as well as remarkable H2O tolerances. In the present work, the microporous titanium silicate molecular sieve ETS-10 was synthesiz...
Published in Journal of Porous Materials
ETS-10, zeolite A and sepiolite based nano-structured materials were prepared and modified with potassium containing compounds using ion-exchange or impregnation and evaluated as basic catalysts for transesterification of vegetable oils using microwave heating. The structural features of these catalysts were characterised in detail by the variable ...
Published in Journal of Porous Materials
In the present work self-bonded pellets of Engelhard Titaniun Silicates, ETS-4 and ETS-10, containing cobalt and carbon nanotubes, were synthesized by hydrothermal synthesis at 190 °C, from gels of the initial composition x–Na2O–0.2TiO2–0.6KF–(1.28x − 2y)HCl–2yHNO3–1.49SiO2–yCoO–39.5H2O, with x equal to 0.8; 1; 1.5; 2.5 mol and y equal to 0.015; 0....
Published in Journal of Porous Materials
The purpose of this study was to evaluate and improve the ammonia adsorption performance of Na/K-ETS-10 material using an ion exchange method followed by calcination process to replace its Na+/K+ ions with H+ ions. The Na/K-ETS-10 starting material and the obtained H-type ETS-10 sample were investigated by temperature-programmed desorption of NH3, ...
Published in Journal of Porous Materials
ETS-10 and ETS-4 microporous materials were synthesized in presence of tetralkylammonium (TAA) ions from gels of molar composition w Na2O–0.10 TAABr–1 SiO2–z TiO2–0.6 KF–1.28 w HCl–39.5 H2O with TAA = tetramethyl-, tetraethyl-, tetrapropyl- and tetrabutyl-ammonium in hydrothermal conditions at 190 °C. The TAA ions enter the microporous channel of E...
Published in Adsorption
Hollow carbon nano-polyhedrons (HCNPHs) supported on Engelhard Titanosilicate-10 (ETS-10) were synthesized by wet impregnation technique using tetrahydrofuran as a solvent. Synthesized HCNPHs/ETS-10 nanosorbent was characterized by X-ray diffraction, Raman spectra, N2-adsorption–desorption isotherm, BET surface area, and scanning electron microscop...
