The use of guided waves to identify damage has become a popular method due to its robustness and fast execution, as well as the advantage of being able to inspect large areas and detect minor structural defects. When a travelling wave on a plate interacts with a defect, it generates a scattered field that will depend on the defects geometry. By ana...
We develop a theory for drying-induced stresses in sessile, poroelastic drops undergoing evaporation on rigid surfaces. Using a lubrication-like approximation, the governing equations of three-dimensional nonlinear poroelasticity are reduced to a single thin-film equation for the drop thickness. We find that thin drops experience compressive elasti...
status: published
This work presents the case study of a welded overhead crane runway girder. A full-shell global finite element model was developed and validated using strain measurements. The global model drives solid submodels of different scales. Using load spectra based on real operational data, hot spot stress and XFEM-based fracture mechanics simulations are ...
Self-healing cementitious materials can extend the service life of structures, improve safety during repair activities and reduce costs with minimal human intervention. Recent advances in self-healing research have shown promise for capsule-based and intrinsic healing systems. However, limited information is available regarding vascular-based self-...
Recently, in-situ X-ray Computed Tomography (CT) has shown its potential for 3D damage analysis in composite materials. However, the characterization of damage in X-ray tomograms is not always straightforward, and it requires post-processing of the 3D images. In this study, we explore the potential of Digital Volume Correlation (DVC) for the detect...
Photoactivated atomic force microscopy (pAFM), which integrates light excitation and mechanical detection of the deflections of a cantilever tip, has become a widely used tool for probing nanoscale structures. Raising the illuminating laser power is an obvious way to boost the signal-to-noise ratio of pAFM, but strong laser power can damage both th...
status: published
Published in Healthcare (Basel, Switzerland)
In 2015, the 2030 Agenda was formally adopted by the United Nations, establishing a set of 17 Sustainable Development Goals (SDGs). SDG 3 seeks to promote Global Health and the quality of public health systems in developing countries. The achievement of these goals requires the commitment of all signing countries, but the COVID-19 crisis is changin...
