Published in Wear
Abrasive wear can occur on tooth and suspension parts such as construction machinery power shovels and bulldozers. In order to reach high safety and low cost, it is important to develop wear resistant material and estimate of life service during abrasion. The amount of alloy element dissolved in the matrix is changed by the type of carbide and m...
Published in Wear
In the current study, a high-carbon, high-silicon steel (1.21 wt% C, 2.56 wt% Mn, 1.59 wt% Si) was subjected to different heat treatments ((a) quenching from 800–1000 °C; (b) quenching from 800–1000 °C with further bainitizing at 250 °C for 8 days), resulting in microstructures consisting (a) of austenite and martensite (up to 94 vol% austenite) or...
Published in Wear
Published in Wear : an international journal on the science and technology of friction lubrication and wear
Contrary to the established principles of the scientific method, a surprising number of experimentally-based papers submitted to tribology journals and conferences report only one test result for each material pair or set of applied conditions. However, like hardness, yield strength, fatigue life, and other material properties, wear data exhibit va...
Published in Wear
Published in Wear
Published in Wear
Published in Wear
Published in Wear
Published in Wear
