Published in Nukleonika
Radioisotope applications in industrial process inspection and evaluation using gamma-ray emitters provide otherwise unavailable information. Offering alternative gamma-ray sources can support the technology by complementing sources’ availability and radiation safety. This work proposes to replace gamma-ray from radioisotopes with prompt gamma-ray ...
Published in Nukleonika
The spontaneous wetting and drying of flat porous samples of linen, cotton and synthetic textiles were studied using dynamic neutron radiography (DNR). The progress of the wetting process of the media was delineated from the obtained neutron dynamical radiography images. The results of the investigation reveal a non-classical behaviour of kinetics ...
Published in Nukleonika
This article reports on the radiolytic synthesis of nanocomposites containing gold nanoparticles (AuNPs) within two types of hydrogels based on 2-hydroxyethyl methacrylate (HEMA): (i) plain networks with various contents in ethylene glycol dimethacrylate (EGDMA), as a cross-linker and (ii) stimuli-responsive (SR) networks prepared from these monome...
Published in Nukleonika
The application of inductively coupled plasma mass spectrometry (ICP-MS), both in solution and laser ablation (LA) mode, and instrumental neutron activation analysis (INAA) in the nuclear material analysis are presented in this paper. The possibility of each technique for the chemical characterization of substances used during TRISO fuel production...
Published in Nukleonika
Operation of marine diesel engines causes significant emission of sulphur and nitrogen oxides. It was noticed worldwide and the regulations concerning harmful emissions were introduced. There were several solutions elaborated; however, emission control for both SOx and NOx requires two distinctive processes realized in separated devices, which is p...
Published in Nukleonika
The sorption of 241Am3+, 85Sr2+ and 137Cs+ by calcium, strontium and barium alginates has been studied under different operation conditions. The most prominent adsorption was found in the pH range of 5–6 for all systems, even if the observed dependence on the acidity of the solution was small. The most favourable time for the adsorption process was...
Published in Nukleonika
Published in Nukleonika
The paper summarizes the results of research on gas products of polypropylene (PP) radiolysis. Particular attention was paid to the phenomena of post-radiation degradation of PP. The protective effect of selected aromatic compounds was investigated. The research was carried out both from the point of view of obtaining radiation-resistant PP varieti...
Published in Nukleonika
The removal of organic pollutants from ship emission was studied using two processes namely electron beam (EB) and hybrid EB with wet scrubbing process. A mobile accelerator unit was used to treat 4915 Nm3/h of flue gas emitted from a tugboat in Riga Shipyard. A volume of 3 m3 seawater containing 36.8 mM of NaClO2 oxidant was used as a wet scrubber...
Published in Nukleonika
The study demonstrates an application of genetic algorithms (GAs) in the optimization of the first core loading pattern. The Massachusetts Institute of Technology (MIT) BEAVRS pressurized water reactor (PWR) model was applied with PARCS nodal-diffusion core simulator coupled with GA numerical tool to perform pattern selection. In principle, GAs hav...
