Ong, Guang Liang Ong, Teng Sian Yap, Seong Ling Liaw, Der-Jang Tou, Teck Yong Yap, Seong Shan Nee, Chen Hon
Published in
Nanotechnology Reviews
In recent years, several strategies have been proposed and demonstrated to enhance the efficiency of organic light-emitting diodes (OLEDs) and organic photovoltaics (OPVs). In both types of devices, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is commonly used to enhance hole injection. The layer is further designed by incor...
Naga Kumar, C. Prabhakar, M. N. Jung-il, Song
Published in
Nanotechnology Reviews
The novel aligned polyvinylidene fluoride (PVDF) green core–shell nanofibers were reinforced to carbon fiber/epoxy prepregs and were manufactured through the vacuum bagging technique. Aligned nanofibers were achieved by suspending a grounded needle between the nozzle and the collector of electrospinning. The self-healing properties were tested thro...
Boraei, Seyyed Behnam Abdollahi Nourmohammadi, Jhamak Mahdavi, Fatemeh Sadat Zare, Yasser Rhee, Kyong Yop Montero, Ana Ferrández Herencia, Antonio Javier Sánchez Ferrari, Begoña
Published in
Nanotechnology Reviews
In this study, three-dimensional (3D) printing of 3D scaffolds containing halloysite nanotubes (HNTs) and strontium ranelate (SrR) as a carrier for the promotion of bone regeneration is investigated. SrR acts as an anabolic bone-forming and anti-catabolic agent, while HNTs act as a carrier of SrR. Poly(lactic acid) (PLA) is used as a biodegradable ...
Gao, Zi-han Gao, Han-jun Zhang, Yi-du Wu, Qiong Chen, Shu-guang Zhou, Xin
Published in
Nanotechnology Reviews
The simulation model represents the microstructure that can accurately analyze and predict composites’ micro-stresses and mechanical properties. The conventional representative volume element (RVE) model can only contain one single-particle form. It makes that all the particles in the simulation model have the same shape, which is significantly dif...
Ramburrun, Poornima Khan, Riaz A. Choonara, Yahya E.
Published in
Nanotechnology Reviews
Biocompatible, attuned, and congruent stimuli-responsive polymers of synthetic and plants and animals-based origins are essential raw materials for constructing bio-matching scaffolds, devices, and vehicles for payload deliveries, tissue engineering, therapeutics, and diagnostic purposes, and also as fill-in materials at biosites for various biomim...
Liang, Yuan-Chang Hsu, Yu-Wei
Published in
Nanotechnology Reviews
In this study, a two-layered thin-film structure consisting of a dispersed nanoscaled Ag2O phase and SnO2 layer (SA) and a mono-composite film layer (CSA) consisting of a nanoscale Ag2O phase in the SnO2 matrix are designed and fabricated for NO2 gas sensor applications. Two-layered and mono-layered SnO2–Ag2O composite thin films were synthesized u...
Zhao, Jiang Wang, Shuangyuan Wang, Qiufan Zhang, Daohong
Published in
Nanotechnology Reviews
Carbon nanotube (CNT) film has attracted tremendous attention in functional material research for its unique structure and excellent properties. However, pristine CNT (PCNT) film is hydrophobic, and mechanical strength and conductivity are poor than reported individual CNT. These challenges impede its wide application. Highly efficient closed-loop ...
Han, Yanlong Lei, Haoyuan Kaken, Habaxi Zhao, Wei Wang, Wei Wumanerjiang, Aikebaier Peng, Wei Guo, Likun Gu, Linxia Kong, Qingquan
...
Published in
Nanotechnology Reviews
Three-dimensional (3D) printing technology has the advantages of fast design and fabrication in clinical orthopedics. This study proposed the application of 3D-printed personalized reverse shoulder prosthesis in a reverse total shoulder arthroplasty for a patient with tuberculosis of the shoulder joint. Traditional and personalized shoulder prosthe...
Bianhong, Li Wei, Qi Qiong, Wu
Published in
Nanotechnology Reviews
Three-dimensional (3D) printing technology is an additive manufacturing technology designed to rapidly process and manufacture complex geometrical components based on computer model design. Based on a 3D data model, materials are accumulated layer by layer through computer control, and the 3D model is finally turned into a stereoscopic object. Comp...
Javed, Shamama Mangla, Bharti Almoshari, Yosif Sultan, Muhammad H. Ahsan, Waquar
Published in
Nanotechnology Reviews
The lipid-based colloidal carriers, such as nanostructured lipid carriers (NLCs), solid lipid nanoparticles (SLNs), nanocapsules, liposomes, and microemulsion, are the latest and significant entrants in the development of drug delivery systems owing to their myriad advantages. The NLCs are second-generation SLNs having unstructured matrix, have hig...