Zinovicius, Antanas Rozene, Juste Sataite, Vakare Guoba Merkelis, Timas Juska, Joris Morkvenaite-Vilkonciene, Inga
Published in
IOP Conference Series: Materials Science and Engineering
Over the past several decades, biology, chemistry, and medicine took advantage of gold nanoparticles (AuNPs) for their fascinating characteristics. Today these nanomaterials can be synthesized in various methods from biosynthesis, when particles are made by microbial culture, to physical. Using the fast scan cyclic voltammetry, AuNPs can be electro...
Bučelis, Kęstutis Škamat, Jelena Černašejus, Olegas
Published in
IOP Conference Series: Materials Science and Engineering
Due to the possibility to produce the parts with complex internal and external geometries, selective laser melting (SLM) process attracts growing interest in various fields of engineering segments such as aircraft, aerospace, biomedical, automotive, marine industries and tooling. Maraging steels, having excellent weldability and high resistance to ...
Harazin, J Wróbel, A
Published in
IOP Conference Series: Materials Science and Engineering
Piezoelectric materials offer an ability to exchange energy between electrical and mechanical systems with fair ease, by using the simple and inverse piezoelectric effect. Piezoelectric transceivers, sensors, microphones, actuators, or active acoustic noise cancellation devices are some of many applications for piezoelectric materials. Due to the n...
Socha, L Gryc, K Sviželová, J Chmiel, M Brathová, M Filipek, S
Published in
IOP Conference Series: Materials Science and Engineering
The research involved numerical simulations in MAGMASOFT® focused on optimising the casting process and solidification of a cast piece type intended for the shipping industry. The paper presents the results of the numerical simulations together with a proposal of changes in the production technology aimed at increasing the casting quality. No serio...
Zinovicius, A Rozene, J Dirma, G Striska, L Stankaitis, S Morkvenaite-Vilkonciene, I
Published in
IOP Conference Series: Materials Science and Engineering
Scanning electrochemical microscopy (SECM) is a local electrochemical analysis technique, which performs scanning of the sample by ultramicroelectrode (UME) [1]. The result of measurement usually is current, which depends on the electrochemical properties of the surface of interest. The errors can be observed if UME geometry is not ideal [2,3]. Thi...
Pawliczek, R Lagoda, T Kurek, M Robak, G
Published in
IOP Conference Series: Materials Science and Engineering
The paper presents the results of research on changes in the damping characteristics of the MZGS100 fatigue test stand. The work of the stand is influenced by the type of material of the tested samples, where different properties affect the dynamic characteristics of the stand. It is important to assess the impact of changes in properties during th...
Benešová, S Burdová, Karolína Hajšman, J
Published in
IOP Conference Series: Materials Science and Engineering
Undesirable additional deformation was observed during the experimental cold rolling of steel. A simulation was performed in Deform software to clarify the causes. The influence of the unequal coefficient of friction, geometric inaccuracies of the rolls and the conveyor, and the situation when the rolls did not have the same diameter or rotated at ...
Coufal, V Křesťan, J Vnouček, M
Published in
IOP Conference Series: Materials Science and Engineering
ARMOX low-alloy high-strength steel sheet is used, among other things, as a basic homogeneous ballistic protection in plate carriers and vehicle bodies. The hardest armour plates of the ARMOX series include ARMOX Advance, which, even with a smaller thickness, provides the same ballistic protection as the stronger ARMOX 500 or ARMOX 600 sheets. The ...
Sidorov, A Iljin, I
Published in
IOP Conference Series: Materials Science and Engineering
The work investigated the durability of the labelling of sports equipment made of composite materials. Professional hockey sticks were taken for research. Research has been done on hockey stick wear for different players: centre and winger and defender. In addition, a study was made of hockey sticks for left-handers and right-handers. In the study ...
Korinek, Jiri Raz, Karel Chval, Zdenek
Published in
IOP Conference Series: Materials Science and Engineering
This paper deals with the usage of the plastic model (created by additive technology), which can be used for the mould production as an internal model for the cavity. This mould is intended for the steel casting technology. The particular plastic model is created by the conventional 3D printer HP Multi Jet Fusion 4200 from the material PA 12 GB. It...
