Publication search

Substrate oxidation enhances the electrochemical production of hydrogen peroxide

Published in Chemical Engineering Journal

Hydrogen peroxide (H2O2) is electrochemically produced via oxygen (O2) reduction on a carbon cathode surface. In order to enhance the production of H2O2, anodic loss pathways, which significantly reduce the overall H2O2 production rate, should be inhibited. In this study, we investigate the effects of organic electron donors ( i.e. , typical chemic...

Microbial fuel cell technology as a downstream process of a membrane bioreactor for sludge reduction

Published in Chemical Engineering Journal

Recently, microbial fuel cells (MFCs) have been integrated with membrane bioreactors (MBRs), either in an internal or an external configuration, for wastewater treatment and energy recovery. In an external configuration, MFCs could be applied for an efficient sludge reduction since they can simultaneously address energy issue and environmental conc...

Microbial fuel cell technology as a downstream process of a membrane bioreactor for sludge reduction

Published in Chemical Engineering Journal

Mechanochemical destruction of perfluorinated pollutants and mechanosynthesis of lanthanum oxyfluoride: A Waste-to-Mater...

Published in Chemical Engineering Journal

Scaling analysis of a microcombustor

Published in Chemical Engineering Journal

Mechanochemical destruction of perfluorinated pollutants and mechanosynthesis of lanthanum oxyfluoride: A Waste-to-Mater...

Published in Chemical Engineering Journal

Mechanochemical destruction of perfluorinated pollutants and mechanosynthesis of lanthanum oxyfluoride: A Waste-to-Mater...

Published in Chemical Engineering Journal

A comprehensive kinetic model for mechanochemical destruction of persistent organic pollutants

Published in Chemical Engineering Journal

Advanced removal of C. famata in bioaerosols by simultaneous adsorption and photocatalytic oxidation of Cu-doped TiO 2/P...

Published in Chemical Engineering Journal

Polyurethane (PU), a honeycomb structure material, was used as a substrate onto which TiO2 and Cu–TiO2 were deposited in order to integrate the adsorption property to the photocatalysts. TiO2 deposited on PU (TiO2/PU) and Cu-doped TiO2 deposited on PU (Cu–TiO2/PU) were synthesized and applied to the removal of Candida famata ( C. famata ), a freque...

Novel integrated approach of adsorption and photo-oxidation using Ag–TiO 2/PU for bioaerosol removal under visible light...

Published in Chemical Engineering Journal

We investigated a novel approach by synthesizing an integrated material, which could act as both adsorbent and photocatalytic material, for bioaerosol purification under visible light conditions. Ag was used as a dopant agent to enhance photocatalytic activity of TiO2, leading to high photocatalytic activity of the doped TiO2 even under visible lig...